Gosund KS602
From Leo's Notes
This page was last edited on 12 November 2022, at 06:38.
The Gosund KS602 is a smart switch which I bought for around $28 CAD for two ($14 CAD each). It has a ESP8266 and can run Tasmota. The unit is very simple to open and easy to reflash with Tasmota.
Tasmota configuration
After flashing Tasmota, I had to configure my unit with the following template since the one on https://templates.blakadder.com/ did not work for me. This template will have the LEDs turn green when on and red when off.
{"NAME":"Gosund KS-602","GPIO":[32,0,320,0,0,0,0,0,0,0,224,0,290,0],"FLAG":0,"BASE":18}
Pinouts
These are the pinouts that are defined. Everything that isn't specified is set to 'None'
| Pin | Feature |
|---|---|
| GPIO0 | Button 1
|
| GPIO2 | Led_i 1
|
| GPIO14 | Relay 1
|
| GPIO16 | Led 3
|
| ||||||||||