Hard Drive Errors
From Leo's Notes
Last edited on 15 June 2020, at 00:41.
READ FPDMA QUEUED
This is possibly a bad cable or connector. Not sure...
[Fri Jun 9 10:06:52 2017] ata1.00: exception Emask 0x0 SAct 0x26 SErr 0x0 action 0x6
[Fri Jun 9 10:06:52 2017] ata1.00: irq_stat 0x40000008
[Fri Jun 9 10:06:52 2017] ata1.00: failed command: READ FPDMA QUEUED
[Fri Jun 9 10:06:52 2017] ata1.00: cmd 60/08:10:40:71:e9/00:00:2c:00:00/40 tag 2 ncq 4096 in
res 41/84:08:40:71:e9/00:00:2c:00:00/00 Emask 0x410 (ATA bus error) <F>
[Fri Jun 9 10:06:52 2017] ata1.00: status: { DRDY ERR }
[Fri Jun 9 10:06:52 2017] ata1.00: error: { ICRC ABRT }
[Fri Jun 9 10:06:52 2017] ata1: hard resetting link
[Fri Jun 9 10:06:52 2017] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Fri Jun 9 10:06:52 2017] ata1.00: configured for UDMA/33
[Fri Jun 9 10:06:52 2017] ata1: EH complete
[Fri Jun 9 10:06:52 2017] ata1.00: exception Emask 0x0 SAct 0x4c0000 SErr 0x0 action 0x6
[Fri Jun 9 10:06:52 2017] ata1.00: irq_stat 0x40000008
[Fri Jun 9 10:06:52 2017] ata1.00: failed command: READ FPDMA QUEUED
[Fri Jun 9 10:06:52 2017] ata1.00: cmd 60/08:90:40:71:e9/00:00:2c:00:00/40 tag 18 ncq 4096 in
res 41/84:08:40:71:e9/00:00:2c:00:00/00 Emask 0x410 (ATA bus error) <F>
[Fri Jun 9 10:06:52 2017] ata1.00: status: { DRDY ERR }
[Fri Jun 9 10:06:52 2017] ata1.00: error: { ICRC ABRT }
[Fri Jun 9 10:06:52 2017] ata1: hard resetting link
[Fri Jun 9 10:06:52 2017] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Fri Jun 9 10:06:52 2017] ata1.00: configured for UDMA/33
[Fri Jun 9 10:06:52 2017] sd 0:0:0:0: [sda] tag#18 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[Fri Jun 9 10:06:52 2017] sd 0:0:0:0: [sda] tag#18 Sense Key : Aborted Command [current]
[Fri Jun 9 10:06:52 2017] sd 0:0:0:0: [sda] tag#18 Add. Sense: Scsi parity error
[Fri Jun 9 10:06:52 2017] sd 0:0:0:0: [sda] tag#18 CDB: Read(10) 28 00 2c e9 71 40 00 00 08 00
[Fri Jun 9 10:06:52 2017] blk_update_request: I/O error, dev sda, sector 753496384
[Fri Jun 9 10:06:52 2017] ata1: EH complete
[Fri Jun 9 10:06:52 2017] EXT4-fs warning (device sda6): dx_probe:739: inode #21378945: lblock 0: comm updatedb: error -5 reading directory block
[Fri Jun 9 10:06:56 2017] ata1.00: exception Emask 0x0 SAct 0x4000000 SErr 0x0 action 0x6
[Fri Jun 9 10:06:56 2017] ata1.00: irq_stat 0x40000008
[Fri Jun 9 10:06:56 2017] ata1.00: failed command: READ FPDMA QUEUED
[Fri Jun 9 10:06:56 2017] ata1.00: cmd 60/08:d0:98:73:e9/00:00:2c:00:00/40 tag 26 ncq 4096 in
res 41/84:08:9e:73:e9/00:00:2c:00:00/00 Emask 0x410 (ATA bus error) <F>
[Fri Jun 9 10:06:56 2017] ata1.00: status: { DRDY ERR }
[Fri Jun 9 10:06:56 2017] ata1.00: error: { ICRC ABRT }
[Fri Jun 9 10:06:56 2017] ata1: hard resetting link
[Fri Jun 9 10:06:56 2017] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Fri Jun 9 10:06:56 2017] ata1.00: configured for UDMA/33
[Fri Jun 9 10:06:56 2017] ata1: EH complete
[Fri Jun 9 10:07:02 2017] ata1.00: exception Emask 0x0 SAct 0x800000 SErr 0x0 action 0x6
[Fri Jun 9 10:07:02 2017] ata1.00: irq_stat 0x40000008
[Fri Jun 9 10:07:02 2017] ata1.00: failed command: READ FPDMA QUEUED
[Fri Jun 9 10:07:02 2017] ata1.00: cmd 60/08:b8:10:75:e9/00:00:2c:00:00/40 tag 23 ncq 4096 in
res 41/84:08:16:75:e9/00:00:2c:00:00/00 Emask 0x410 (ATA bus error) <F>
[Fri Jun 9 10:07:02 2017] ata1.00: status: { DRDY ERR }
[Fri Jun 9 10:07:02 2017] ata1.00: error: { ICRC ABRT }
[Fri Jun 9 10:07:02 2017] ata1: hard resetting link
[Fri Jun 9 10:07:03 2017] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Fri Jun 9 10:07:03 2017] ata1.00: configured for UDMA/33
[Fri Jun 9 10:07:03 2017] ata1: EH complete
Smart tests passed without issue:
# smartctl -a /dev/sda
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.7.9-200.fc24.x86_64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Laptop SSHD
Device Model: ST500LM000-1EJ162
Serial Number: W372C8XL
LU WWN Device Id: 5 000c50 0730cdae3
Firmware Version: DEM7
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Fri Jun 9 10:15:15 2017 MDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 139) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 98) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x1081) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 115 099 006 Pre-fail Always - 91177928
3 Spin_Up_Time 0x0003 099 099 085 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 135
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 4311231136
9 Power_On_Hours 0x0032 076 076 000 Old_age Always - 21394
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 207
184 End-to-End_Error 0x0032 091 091 099 Old_age Always FAILING_NOW 9
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 4295032833
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 069 054 045 Old_age Always - 31 (Min/Max 31/40)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 68
193 Load_Cycle_Count 0x0032 039 039 000 Old_age Always - 122489
194 Temperature_Celsius 0x0022 031 046 000 Old_age Always - 31 (0 20 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 17221 (25 89 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3864120529
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1283261006
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 9 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 9 occurred at disk power-on lifetime: 20711 hours (862 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 ff ff ff 4f 00 00:00:28.817 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 00:00:28.817 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:00:28.815 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 00:00:28.813 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 00:00:28.813 READ FPDMA QUEUED
Error 8 occurred at disk power-on lifetime: 20711 hours (862 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 00:00:28.163 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 00:00:28.163 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 00:00:28.161 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:00:28.161 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:00:28.159 READ FPDMA QUEUED
Error 7 occurred at disk power-on lifetime: 20711 hours (862 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 ff ff ff 4f 00 00:00:23.819 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 00:00:23.818 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:00:23.817 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 00:00:23.801 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 00:00:23.800 READ FPDMA QUEUED
Error 6 occurred at disk power-on lifetime: 20711 hours (862 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 00:00:22.125 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 00:00:22.124 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:00:22.124 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 00:00:22.124 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:00:22.080 IDENTIFY DEVICE
Error 5 occurred at disk power-on lifetime: 20711 hours (862 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 ff ff ff 4f 00 00:00:21.842 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 00:00:21.842 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:00:21.841 READ FPDMA QUEUED
60 00 80 ff ff ff 4f 00 00:00:21.840 READ FPDMA QUEUED
60 00 40 ff ff ff 4f 00 00:00:21.839 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 21377 -
# 2 Short offline Completed without error 00% 21376 -
# 3 Short offline Aborted by host 90% 21376 -
# 4 Short offline Completed without error 00% 21376 -
# 5 Extended offline Completed without error 00% 8973 -
# 6 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.