Dell Remote Access Controller: Difference between revisions
From Leo's Notes
This page was last edited on 30 December 2021, at 01:21.
Created page with "== Tasks == === Access the serial console === Access RAC via SSH, then run: {{Highlight | code = $ console com2 | lang = terminal }} Hit <code>Ctrl</code> - <code>\</code> to..." |
m Added categories and navbox |
||
| Line 32: | Line 32: | ||
| lang = terminal | | lang = terminal | ||
}} | }} | ||
{{Navbox Hardware}} | |||
[[Category:Hardware]] | |||
Revision as of 01:21, 30 December 2021
Tasks
Access the serial console
Access RAC via SSH, then run:
$ console com2
Hit Ctrl - \ to exit.
Restart the server
$ racadm serveraction powercycle
Other actions include:
- powerdown to halt system
- powerup to start the system
- powercycle to stop and start the system
- powerstatus to display the system status (either ON or OFF)
- hardreset to force a power reset
Restart the remote access controller
$ racadm racreset soft
You may also choose to use a hard reset or force the reset with -f. Eg:
$ racadm racreset hard -f