Arch Linux: Difference between revisions

From Leo's Notes
This page was last edited on 2 April 2015, at 22:00.
← Older editNewer edit →
VisualWikitext
No edit summary
Line 14: Line 14:


== Installation ==
== Installation ==
You should be asked for a mirror when booting (at least via PXE). This should set the mirrors up for you automaticall<sup>[citation needed]</sup>. You can verify this by checking <code>/etc/pacman.d/mirrorlist</code>
The PXE rom that you can download from ArchLinux's website points iPXE to fetch PXE data from a remote HTTP server, http://releng.archlinux.org/pxeboot/boot/cfg/. The PXE configs will then boot the live image from one of the many available mirrors that is selected in the boot menu.


=== Remastering ===
'''Side Note''': You may alter the [[iPXE]] script to use a different server by recompiling the iPXE kernel and automate the install process by appending to the airoot customize script.
pacman -S archiso
cp -r /usr/share/archiso/configs/releng /root
# edit relang/airootfs/root/custom*
./build.sh -v
=== Steps ===
After booting into the live image, you need to:
After booting into the live image, you need to:
# Read the install.txt file
# Read the install.txt file

Revision as of 22:00, 2 April 2015

PXE

If you already have a PXE server, create a new entry that boots their iPXE kernel: 

cd /tftpboot/images/ArchLinux/
wget https://releng.archlinux.org/pxeboot/ipxe.lkrn

The default config (or the config your computer boots off of) should contain: 

LABEL ArchLinux
	MENU LABEL ArchLinux
        kernel /images/ArchLinux/ipxe.lkrn

You can customize the kernel to automate installs.

Installation

The PXE rom that you can download from ArchLinux's website points iPXE to fetch PXE data from a remote HTTP server, http://releng.archlinux.org/pxeboot/boot/cfg/. The PXE configs will then boot the live image from one of the many available mirrors that is selected in the boot menu.

Remastering

Side Note: You may alter the iPXE script to use a different server by recompiling the iPXE kernel and automate the install process by appending to the airoot customize script. 

pacman -S archiso
cp -r /usr/share/archiso/configs/releng /root
# edit relang/airootfs/root/custom*
./build.sh -v


Steps

After booting into the live image, you need to:

  1. Read the install.txt file
  2. Create a file system
  3. Mount the file system to /mnt
  4. Run pacstrap /mnt/base
  5. Generate fstab genfstab -p /mnt >> /mnt/etc/fstab
  6. Chroot into the new system arch-chroot /mnt
  7. Set the hostname echo "hostname" >> /etc/hostname
  8. Set the timezone ln -sf /usr/share/zoneinfo/America/Edmonton /etc/localtime
  9. Locales
    • Comment out any locales you want in /etc/locale.gen
    • Run locale-gen
  10. Set the default locale echo LANG=\"en_US.UTF-8\" > /etc/locale.conf
  11. Set up networking configs ??
  12. Console font /etc/vconsole.conf
    • echo KEYMAP=\"us\" > /etc/vconsole.conf
    • echo FONT=\"latarcyrheb-sun16\" >> /etc/vconsole.conf
  13. Rebuild ram disk mkinitcpio -p linux
  14. Set the root password passwd
  15. Install a bootloader
    • pacman -Sy grub
    • grub-install --target=i386-pc --recheck /dev/sda
    • grub-mkconfig -o /boot/grub/grub.cfg


Reboot and hope it works.