Dell Remote Access Controller

From Leo's Notes
Revision as of 05:33, 14 December 2021 by Leo (talk | contribs) (Created page with "== Tasks == === Access the serial console === Access RAC via SSH, then run: {{Highlight | code = $ console com2 | lang = terminal }} Hit <code>Ctrl</code> - <code>\</code> to...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
This page was last edited on 14 December 2021, at 05:33.

Tasks

Access the serial console

Access RAC via SSH, then run: 

$ console com2

Hit Ctrl - \ to exit.

Restart the server

$ racadm serveraction powercycle

Other actions include:

  • powerdown to halt system
  • powerup to start the system
  • powercycle to stop and start the system
  • powerstatus to display the system status (either ON or OFF)
  • hardreset to force a power reset

Restart the remote access controller

$ racadm racreset soft

You may also choose to use a hard reset or force the reset with -f. Eg: 

$ racadm racreset hard -f