Buffalo TeraStation WS-WVL/R1

From Leo's Notes
Revision as of 04:49, 23 November 2020 by Leo (talk | contribs) (→Linux Drivers)
This page was last edited on 23 November 2020, at 04:49.

The Buffalo TeraStation WS-WVL/R1 is a two disk consumer network attached storage (NAS) unit manufactured by Buffalo Technology. It is very similar to the Buffalo TeraStation TS5400 but appears to be using a generation older CPU and memory.

This unit was first made available from around 2012.

CPU Intel Atom D510 1.66GHz (Dual Core)
RAM 1x 2GB DDR2 800MHz SODIMM
Chipset ?
Disk 2x SATA II, AHCI
Network 2x Marvell Technology Group Ltd. Yukon Optima 88E8059
USB 2x USB 2.0, and 2x USB 3.0
Serial 1 rear serial port
Video 1 VGA output

I ordered this unit from Ebay for $55 including shipping. This unit is very different from the TS4500. The main motherboard resides on the bottom of the unit rather than on the side.

Linux Drivers

The network adapter does not work 'out of the box' with CentOS 8. lspci shows the following devices:

00:00.0 Host bridge [0600]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge [8086:a000] (rev 02)
00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a001] (rev 02)
00:02.1 Display controller [0380]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a002] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02)
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02)
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02)
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02)
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02)
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02)
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface Controller [8086:2916] (rev 02)
00:1f.2 SATA controller [0106]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] [8086:2922] (rev 02)
02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. Yukon Optima 88E8059 [PCIe Gigabit Ethernet Controller with AVB] [11ab:4381] (rev 11)
03:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. Yukon Optima 88E8059 [PCIe Gigabit Ethernet Controller with AVB] [11ab:4381] (rev 11)
04:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 03)

Searching around, the sk98lin driver is what is required to get the network to work.

See Also