Arduino

From Leo's Notes
Revision as of 23:42, 24 February 2017 by Leo (talk | contribs)
This page was last edited on 24 February 2017, at 23:42.

Programming the Arduino Mini

You can use a regular Arduino Uno or Duemilanove to program an Arduino Mini. To do so:


Arduino Uno/Duemilanove to Mini Connection
  1. Connect GND and VCC from the Arduino Uno to the Arduino Mini
  2. Pull the Atmega 328 from the Arduino Uno
  3. Connect RX (Pin 0) and TX (Pin 1) from the Arduino Uno to the Arduino Mini

Then program the Arduino as you normally would while making sure that the board selected in the Arduino IDE is set to the Arduino Mini.