Crucial V4 SSD: Difference between revisions
From Leo's Notes
This page was last edited on 30 May 2017, at 07:07.
Created page with "This is a 'dead' SSD after a firmware update which wiped all the smart data: {{highlight|lang=text|code= # smartctl -a /dev/sdc smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4...." |
No edit summary |
||
| Line 82: | Line 82: | ||
Selective Self-tests/Logging not supported | Selective Self-tests/Logging not supported | ||
}} | |||
{{highlight|lang=text|code= | |||
# smartctl -a /dev/sdc | |||
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.10.17-200.fc25.x86_64] (local build) | |||
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | |||
=== START OF INFORMATION SECTION === | |||
Device Model: V4-CT032V4SSD2 | |||
Serial Number: 200097926 | |||
LU WWN Device Id: 5 00a075 60bed4086 | |||
Firmware Version: S5FAMM25 | |||
User Capacity: 32,017,047,552 bytes [32.0 GB] | |||
Sector Size: 512 bytes logical/physical | |||
Rotation Rate: Solid State Device | |||
Form Factor: 2.5 inches | |||
Device is: Not in smartctl database [for details use: -P showall] | |||
ATA Version is: ATA8-ACS (minor revision not indicated) | |||
SATA Version is: SATA 2.6, 3.0 Gb/s | |||
Local Time is: Tue May 30 01:05:36 2017 MDT | |||
SMART support is: Available - device has SMART capability. | |||
SMART support is: Enabled | |||
=== START OF READ SMART DATA SECTION === | |||
SMART overall-health self-assessment test result: PASSED | |||
General SMART Values: | |||
Offline data collection status: (0x00) Offline data collection activity | |||
was never started. | |||
Auto Offline Data Collection: Disabled. | |||
Self-test execution status: ( 0) The previous self-test routine completed | |||
without error or no self-test has ever | |||
been run. | |||
Total time to complete Offline | |||
data collection: ( 255) seconds. | |||
Offline data collection | |||
capabilities: (0x1b) SMART execute Offline immediate. | |||
Auto Offline data collection on/off support. | |||
Suspend Offline collection upon new | |||
command. | |||
Offline surface scan supported. | |||
Self-test supported. | |||
No Conveyance Self-test supported. | |||
No Selective Self-test supported. | |||
SMART capabilities: (0x0003) Saves SMART data before entering | |||
power-saving mode. | |||
Supports SMART auto save timer. | |||
Error logging capability: (0x01) Error logging supported. | |||
General Purpose Logging supported. | |||
Short self-test routine | |||
recommended polling time: ( 1) minutes. | |||
Extended self-test routine | |||
recommended polling time: ( 2) minutes. | |||
SMART Attributes Data Structure revision number: 16 | |||
Vendor Specific SMART Attributes with Thresholds: | |||
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |||
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 | |||
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 2 | |||
12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 4 | |||
33 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 160 | |||
168 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 0 | |||
177 Wear_Leveling_Count 0x0003 100 100 010 Pre-fail Always - 1 | |||
181 Program_Fail_Cnt_Total 0x0003 100 100 000 Pre-fail Always - 0 | |||
182 Erase_Fail_Count_Total 0x0003 100 100 000 Pre-fail Always - 0 | |||
192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 1 | |||
170 Unknown_Attribute 0x0003 100 100 010 Pre-fail Always - 10 | |||
173 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 196664 | |||
218 Unknown_Attribute 0x000b 100 100 050 Pre-fail Always - 0 | |||
231 Temperature_Celsius 0x000b 100 100 000 Pre-fail Always - 99 | |||
232 Available_Reservd_Space 0x000b 100 100 000 Pre-fail Always - 0 | |||
233 Media_Wearout_Indicator 0x000b 100 100 000 Pre-fail Always - 11 | |||
241 Total_LBAs_Written 0x0013 100 100 000 Pre-fail Always - 2 | |||
242 Total_LBAs_Read 0x0013 100 100 000 Pre-fail Always - 0 | |||
246 Unknown_Attribute 0x0002 100 100 050 Old_age Always - 61095 | |||
SMART Error Log Version: 1 | |||
No Errors Logged | |||
SMART Self-test log structure revision number 1 | |||
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |||
Selective Self-tests/Logging not supported | |||
}} | }} | ||
Revision as of 07:07, 30 May 2017
This is a 'dead' SSD after a firmware update which wiped all the smart data:
# smartctl -a /dev/sdc
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.8.6-300.fc25.x86_64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: V4-CT032V4SSD2
Serial Number: 200097926
LU WWN Device Id: 5 00a075 60bed4086
Firmware Version: S5FAMM25
User Capacity: 32,017,047,552 bytes [32.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Mon May 29 22:18:28 2017 MDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 255) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 2) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 2
33 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 160
168 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 0
177 Wear_Leveling_Count 0x0003 100 100 010 Pre-fail Always - 1
181 Program_Fail_Cnt_Total 0x0003 100 100 000 Pre-fail Always - 0
182 Erase_Fail_Count_Total 0x0003 100 100 000 Pre-fail Always - 0
192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 0
170 Unknown_Attribute 0x0003 100 100 010 Pre-fail Always - 10
173 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 50
218 Unknown_Attribute 0x000b 100 100 050 Pre-fail Always - 0
231 Temperature_Celsius 0x000b 100 100 000 Pre-fail Always - 100
232 Available_Reservd_Space 0x000b 100 100 000 Pre-fail Always - 0
233 Media_Wearout_Indicator 0x000b 100 100 000 Pre-fail Always - 0
241 Total_LBAs_Written 0x0013 100 100 000 Pre-fail Always - 0
242 Total_LBAs_Read 0x0013 100 100 000 Pre-fail Always - 0
246 Unknown_Attribute 0x0002 100 100 050 Old_age Always - 80
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Selective Self-tests/Logging not supported
# smartctl -a /dev/sdc
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.10.17-200.fc25.x86_64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: V4-CT032V4SSD2
Serial Number: 200097926
LU WWN Device Id: 5 00a075 60bed4086
Firmware Version: S5FAMM25
User Capacity: 32,017,047,552 bytes [32.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Tue May 30 01:05:36 2017 MDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 255) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 2) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 2
12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 4
33 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 160
168 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 0
177 Wear_Leveling_Count 0x0003 100 100 010 Pre-fail Always - 1
181 Program_Fail_Cnt_Total 0x0003 100 100 000 Pre-fail Always - 0
182 Erase_Fail_Count_Total 0x0003 100 100 000 Pre-fail Always - 0
192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 1
170 Unknown_Attribute 0x0003 100 100 010 Pre-fail Always - 10
173 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 196664
218 Unknown_Attribute 0x000b 100 100 050 Pre-fail Always - 0
231 Temperature_Celsius 0x000b 100 100 000 Pre-fail Always - 99
232 Available_Reservd_Space 0x000b 100 100 000 Pre-fail Always - 0
233 Media_Wearout_Indicator 0x000b 100 100 000 Pre-fail Always - 11
241 Total_LBAs_Written 0x0013 100 100 000 Pre-fail Always - 2
242 Total_LBAs_Read 0x0013 100 100 000 Pre-fail Always - 0
246 Unknown_Attribute 0x0002 100 100 050 Old_age Always - 61095
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Selective Self-tests/Logging not supported