Epson POS: Difference between revisions
From Leo's Notes
This page was last edited on 15 March 2017, at 17:55.
No edit summary |
|||
| Line 1: | Line 1: | ||
The ESC/POS is a set of instructions for thermal paper printers communicated over serial, parallel, or USB. | The ESC/POS is a set of instructions for thermal paper printers communicated over serial, parallel, or USB. | ||
== Instructions == | |||
See the command reference list below for a detailed list of instructions. | |||
Epson's command list shows the command with ASCII names rather than the hex values, so sending {{code|1B 40}} to initialize a printer is equivalent to {{code|ESC @}}. | |||
Here are some common instructions: | |||
* {{code|1B 40}} Initialize the ESC/POS printer | |||
* {{code|1C 70 01 00}} = Print first bit image stored in NVRam | |||
* {{code|1B 64 05 1D 56 01}} = Epson cutter command | |||
* {{code|0A}} = Line feed | |||
Revision as of 17:55, 15 March 2017
The ESC/POS is a set of instructions for thermal paper printers communicated over serial, parallel, or USB.
Instructions
See the command reference list below for a detailed list of instructions.
Epson's command list shows the command with ASCII names rather than the hex values, so sending 1B 40 to initialize a printer is equivalent to ESC @.
Here are some common instructions:
1B 40Initialize the ESC/POS printer1C 70 01 00= Print first bit image stored in NVRam1B 64 05 1D 56 01= Epson cutter command0A= Line feed
See Also
PHP Library:
Epson's 'official' documents:
Epson's Logo Utility:
Command References:
- http://www.smartlab.at/tabshop-pos/escpos-codes/
- http://www.starasia.com/Download/Manual/escpos_cm_en.pdf
- http://content.epson.de/fileadmin/content/files/RSD/downloads/escpos.pdf
- http://www.aures-support.fr/DE/wp-content/uploads/2016/04/ESCPOS-command-manual20160428.pdf
- https://reference.epson-biz.com/modules/ref_escpos/index.php?content_id=72