Pi-hole

From Leo's Notes
Revision as of 20:25, 20 June 2020 by Leo (talk | contribs) (initial content)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
This page was last edited on 20 June 2020, at 20:25.

Pi-hole is a light weight application that configures a DNS and DHCP server for the purpose of blocking advertisements. It comes with an optional control panel written in PHP. As the name suggests, it is designed to run on a Raspberry Pi, although it can also be installed on anything that runs a supported version of Linux.

Installation

Pi-hole can be installed on a clean install of Raspbian, Ubuntu, Debian, Fedora, or CentOS. The installation process can be started by running their install script with alternative methods listed on their installation page. 

# curl -sSL https://install.pi-hole.net | bash

Follow the installation steps and make a note of the admin password that is generated. If you did not see the admin password or if you've forgotten it, you can reset it with pihole -a -p.

Administration

TFTP / PXE Boot Support

OpenWRT TFTP/BOOTP settings used to make PXE booting possible on the network.

Unlike in OpenWRT where you can define the TFTP settings for dnsmasq directly in Luci, with Pi-hole, you will need to define the dnsmasq DHCP options configuration in a configuration file manually.

Create a dnsmasq configuration file at /etc/dnsmasq.d/02-tftp.conf with the following lines to define the next server and next file. These are the same values that you would have entered in OpenWRT via Luci. Ensure that the TFTP root exists and contains your PXE boot files. 

tftp-root=/tftpboot
dhcp-boot=pxelinux.0,10.1.2.54,10.1.2.54

Restart dnsmasq (via systemd or the Pi-hole control panel) to apply.

Updating

Updating Pi-hole is as simple as running: 

# pihole -up


See Also