Tapo C200: Difference between revisions
No edit summary |
|||
| Line 88: | Line 88: | ||
| lang = text | | lang = text | ||
}} | }} | ||
If you let the camera boot normally, you will eventually be allowed to log in after hitting the enter key. Unfortunately, the root password is currently unknown (we talk about this in a section below). Instead, we'll have to boot into single user mode to bypass this password. | |||
To boot into single user mode, tack on <code>init=/bin/sh</code> to the <code>bootargs</code> variable and run the <code>bootcmd</code> commands: | To boot into single user mode, tack on <code>init=/bin/sh</code> to the <code>bootargs</code> variable and run the <code>bootcmd</code> commands: | ||
{{Highlight | {{Highlight | ||
| Line 97: | Line 99: | ||
}} | }} | ||
=== | === Continuing the boot process === | ||
Because we're running the shell as init, nothing is mounted at this stage. After some exploring, it turns out that the system's based on OpenWRT 12. The init scripts that /sbin/init runs to mount our filesystems are actually in <code>/etc/preinit</code>. Calling <code>/etc/preinit</code> is sufficient in getting our system in a more usable state. | |||
{{Highlight | |||
| code = # /etc/preinit | |||
## Set the root password since it's set to something unknown | |||
# passwd | |||
## Continue with the boot process | |||
# exec /sbin/init | |||
| lang = terminal | |||
}} | |||
After letting the system boot, you should now be able to log in as root using the password you assigned. | |||
You can start telnetd by running: <code>telnetd -l /bin/sh -F</code> | |||
<code> | == Exploring the system == | ||
The system is running OpenWRT 12.09-rc1 with kernel <code>Linux SLP 3.10.27 #2 PREEMPT Mon Jun 27 09:12:59 CST 2022 rlx GNU/Linux</code> | |||
{{Highlight | |||
| code = root@SLP:~# cat /proc/cpuinfo | |||
system type : RLX Linux for IPCam Platform | |||
machine : Unknown | |||
processor : 0 | |||
cpu model : Taroko V0.2 FPU V0.1 | |||
BogoMIPS : 497.66 | |||
tlb_entries : 64 | |||
mips16 implemented : yes | |||
root@SLP:~# free -m | |||
total used free shared buffers | |||
Mem: 40524 37556 2968 0 2236 | |||
-/+ buffers: 35320 5204 | |||
Swap: 0 0 0 | |||
| lang = terminal | |||
}} | |||
< | === Process list === | ||
After getting telnet to run, this is what the process list looks like. | |||
{{Highlight | |||
| code = root@SLP:~# ps -w | |||
PID USER VSZ STAT COMMAND | |||
1 root 2324 S init | |||
2 root 0 SW [kthreadd] | |||
3 root 0 SW [ksoftirqd/0] | |||
4 root 0 SW [kworker/0:0] | |||
5 root 0 SW< [kworker/0:0H] | |||
6 root 0 SW [kworker/u2:0] | |||
7 root 0 SW [rcu_preempt] | |||
8 root 0 SW [rcu_bh] | |||
9 root 0 SW [rcu_sched] | |||
10 root 0 SW< [khelper] | |||
11 root 0 SW< [writeback] | |||
12 root 0 SW< [bioset] | |||
13 root 0 SW< [kblockd] | |||
14 root 0 SW [khubd] | |||
15 root 0 SW [kworker/0:1] | |||
16 root 0 SW [kswapd0] | |||
17 root 0 SW [fsnotify_mark] | |||
18 root 0 SW< [crypto] | |||
46 root 0 SW [kworker/u2:2] | |||
47 root 0 SW< [deferwq] | |||
50 root 0 SW< [kworker/0:1H] | |||
277 root 2324 S -ash | |||
292 root 0 DW [reset_thread] | |||
303 root 0 SW< [cryptodev_queue] | |||
316 root 864 S /sbin/hotplug2 --override --persistent --set-rules-file /etc/hotplug2.rules --set-coldplug-cmd /sbin/udev | |||
332 root 888 S /sbin/ubusd | |||
359 root 8036 S tp_manage | |||
394 root 3420 S /usr/bin/ledd | |||
396 root 3220 S /usr/sbin/netlinkd | |||
399 root 5464 S < /usr/bin/system_state_audio | |||
473 root 1636 S /sbin/netifd | |||
474 root 1516 S /usr/sbin/connModed | |||
479 root 1528 S /usr/sbin/connModed | |||
485 root 10124 S /usr/sbin/wlan-manager | |||
609 root 0 SW [RTW_CMD_THREAD] | |||
651 root 1200 S wpa_supplicant -B -Dwext -iwlan0 -P/tmp/supplicant_pid -C/var/run/wpa_supplicant -bbr-wan | |||
677 root 13516 S /usr/bin/dsd | |||
705 root 4412 S /bin/cloud-brd -c /var/etc/cloud_brd_conf | |||
800 root 14972 S /bin/cloud-client | |||
804 root 13764 S /bin/cloud-service | |||
1072 root 3876 S /usr/sbin/uhttpd -f -h /www -T 180 -A 0 -n 8 -R -r C200 -C /tmp/uhttpd.crt -K /tmp/uhttpd.key -s 443 | |||
1082 root 5880 S /usr/bin/rtspd | |||
1084 root 5988 S /usr/bin/relayd | |||
1092 root 7196 S /usr/bin/p2pd | |||
1096 root 11144 S /bin/dn_switch | |||
1098 root 4200 S /bin/storage_manager | |||
1138 root 39736 R /bin/cet | |||
1192 root 30360 S /bin/vda | |||
1198 root 3804 S /bin/wtd | |||
1206 root 11344 S /bin/nvid | |||
1258 root 2324 S udhcpc -p /var/run/static-dhcpc.pid -s /lib/netifd/static-dhcp.script -f -t 0 -i br-wan -r 10.1.3.247 -H | |||
1344 root 2328 S /usr/sbin/ntpd -n -p time.nist.gov -p 128.138.140.44 -p 192.36.144.22 -p time-a.nist.gov -p time-b.nist.g | |||
1359 root 3840 S /usr/bin/motord | |||
3887 root 2320 S telnetd -l /bin/sh -F | |||
3900 root 2324 S /bin/sh | |||
3918 root 2320 R ps -w | |||
| lang = terminal | |||
}} | |||
=== Network daemons === | |||
{{Highlight | |||
| code = root@SLP:~# netstat -lnp | |||
Active Internet connections (only servers) | |||
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name | |||
tcp 0 0 0.0.0.0:8800 0.0.0.0:* LISTEN 1138/cet | |||
tcp 0 0 127.0.0.1:929 0.0.0.0:* LISTEN 1092/p2pd | |||
tcp 0 0 0.0.0.0:20002 0.0.0.0:* LISTEN 359/tp_manage | |||
tcp 0 0 0.0.0.0:2020 0.0.0.0:* LISTEN 1206/nvid | |||
tcp 0 0 0.0.0.0:554 0.0.0.0:* LISTEN 1138/cet | |||
tcp 0 0 0.0.0.0:23 0.0.0.0:* LISTEN 3887/telnetd | |||
tcp 0 0 127.0.0.1:921 0.0.0.0:* LISTEN 1084/relayd | |||
tcp 0 0 127.0.0.1:922 0.0.0.0:* LISTEN 1082/rtspd | |||
tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 1072/uhttpd | |||
udp 0 0 0.0.0.0:20002 0.0.0.0:* 359/tp_manage | |||
udp 0 0 0.0.0.0:3702 0.0.0.0:* 1206/nvid | |||
| lang = terminal | |||
}} | |||
=== Filesystems === | |||
{{Highlight | |||
| code = root@SLP:~# df -h | |||
Filesystem Size Used Available Use% Mounted on | |||
/dev/root 2.5M 2.5M 0 100% /rom | |||
tmpfs 19.8M 1012.0K 18.8M 5% /tmp | |||
tmpfs 512.0K 0 512.0K 0% /dev | |||
rwroot 19.8M 24.0K 19.8M 0% /overlay | |||
/dev/mtdblock7 3.5M 3.5M 0 100% /rom/sp_rom | |||
overlayfs:/overlay 3.5M 3.5M 0 100% /rom/mnt | |||
overlayfs:/overlay 19.8M 24.0K 19.8M 0% / | |||
| lang = terminal | |||
}} | |||
=== Root password === | === Root password === | ||
| Line 120: | Line 236: | ||
| lang = text | | lang = text | ||
}} | }} | ||
=== RTSP === | |||
RTSP works out of the box after you enable it with the Tapo app. You must set a username and password. | |||
There are two streams that are enabled with this option. | |||
* Full resolution - <code>rtsp://username:password@$IP/stream1</code> | |||
* 360p resolution - <code>rtsp://username:password@$IP/stream2</code> | |||
== Hack ideas == | |||
Anyway to side load a hack via SDCard? | |||
* Don't see anything that reads the sdcard in the boot process | |||
* uboot doesn't seem to read the SD card, but can we tweak it so it does? | |||
* Tack on a ESP8266 to control the boot process? (eg. set boot options / password / start telnet via serial on each boot) | |||
* Flash the desired changes and lock out any firmware upgrades? | |||
== See also == | == See also == | ||
Revision as of 09:53, 27 November 2022
The TP-Link Tapo C200 is a 1080p IP camera that can tilt and pan. The camera supports RTSP out of the box.
Serial console
Based on the information from https://drmnsamoliu.github.io/shell.html
Serial console can be accessed by wiring a USB UART to the test pads on the main board. Note that the TX/RX appears to be at 3.3v levels, so take care to use an appropriate UART device or a logic level shifter.
| Pin | Function |
|---|---|
| TP9 | to UART RX (via 3.3v level shifter) |
| TP10 | to UART TX (via 3.3v level shifter) |
| TP11 | GND |
You should see some boot messages when the device is powered on. Enter slp when you see the second Autobooting in 1 seconds message to enter the U-Boot menu.
U-Boot 2014.01-v1.2 (Aug 25 2021 - 12:36:20)
Board: IPCAM RTS3903 CPU: 500M :rx5281 prid=0xdc02
force spi nor mode
DRAM: 64 MiB @ 1066 MHz
Skipping flash_init
Flash: 0 Bytes
SF: Unsupported flash IDs: manuf 20, jedec 4017, ext_jedec 0000
flash status is 0, 2, 0
SF: Detected unknown with page size 256 Bytes, erase size 64 KiB, total 8 MiB
Using default environment
Autobooting in 1 seconds
set watchdog, resetting...
U-Boot 2014.01-v1.2 (Jun 27 2022 - 09:04:38)
Board: IPCAM RTS3903 CPU: 500M :rx5281 prid=0xdc02
force spi nor mode
DRAM: 64 MiB @ 1066 MHz
manuf 20, jedec 4017, ext_jedec 0000
flash status is 0, 2, 0
SF: Detected unknown with page size 256 Bytes, erase size 64 KiB, total 8 MiB
Flash: 0 Bytes
manuf 20, jedec 4017, ext_jedec 8204
flash status is 0, 2, 0
SF: Detected unknown with page size 256 Bytes, erase size 64 KiB, total 8 MiB
Using default environment
In: serial
Out: serial
Err: serial
Net: Realtek PCIe GBE Family Controller mcfg = 0024
new_ethaddr = 00:00:00:00:00:00
r8168#0
VF: validateLocalFirmware: copying flash to 0x82000000
manuf 20, jedec 4017, ext_jedec 0000
flash status is 0, 2, 0
SF: Detected unknown with page size 256 Bytes, erase size 64 KiB, total 8 MiB
SF: 8388608 bytes @ 0x0 Read: OK
VF: validateLocalFirmware: ret=0(82fb7de0)
VF: validateLocalFirmware: validate local firmware...
TP Header at 82070000
Autobooting in 1 seconds <-- At this point, type 'slp'
rlxboot#
On the latest firmware as of November 2022, these are the settings that are set on my unit. Note the address to the kernel is at 0x70000 rather than 0x60000 as documented by the Tapo C200 research docs.
rlxboot# printenv
addmisc=setenv bootargs ${bootargs}console=ttyS0,${baudrate}panic=1
baudrate=57600
bootaddr=(0xBC000000 + 0x120000)
bootargs=console=ttyS1,57600 root=/dev/mtdblock6 spdev=/dev/mtdblock7 rts-quadspi.channels=dual
bootcmd=sf probe;sf read 0x82000000 0x70000 0x300000;bootm 0x82000000
bootdelay=1
bootfile=/vmlinux.img
ethact=r8168#0
ethaddr=00:00:00:00:00:00
load=tftp 80500000 ${u-boot}
loadaddr=0x80100000
stderr=serial
stdin=serial
stdout=serial
Environment size: 477/131068 bytes
If you let the camera boot normally, you will eventually be allowed to log in after hitting the enter key. Unfortunately, the root password is currently unknown (we talk about this in a section below). Instead, we'll have to boot into single user mode to bypass this password.
To boot into single user mode, tack on init=/bin/sh to the bootargs variable and run the bootcmd commands:
# setenv bootargs ${bootargs} init=/bin/sh
# sf probe
# sf read 0x82000000 0x70000 0x300000
# bootm 0x82000000
Continuing the boot process
Because we're running the shell as init, nothing is mounted at this stage. After some exploring, it turns out that the system's based on OpenWRT 12. The init scripts that /sbin/init runs to mount our filesystems are actually in /etc/preinit. Calling /etc/preinit is sufficient in getting our system in a more usable state.
# /etc/preinit
## Set the root password since it's set to something unknown
# passwd
## Continue with the boot process
# exec /sbin/init
After letting the system boot, you should now be able to log in as root using the password you assigned.
You can start telnetd by running: telnetd -l /bin/sh -F
Exploring the system
The system is running OpenWRT 12.09-rc1 with kernel Linux SLP 3.10.27 #2 PREEMPT Mon Jun 27 09:12:59 CST 2022 rlx GNU/Linux
root@SLP:~# cat /proc/cpuinfo
system type : RLX Linux for IPCam Platform
machine : Unknown
processor : 0
cpu model : Taroko V0.2 FPU V0.1
BogoMIPS : 497.66
tlb_entries : 64
mips16 implemented : yes
root@SLP:~# free -m
total used free shared buffers
Mem: 40524 37556 2968 0 2236
-/+ buffers: 35320 5204
Swap: 0 0 0
Process list
After getting telnet to run, this is what the process list looks like.
root@SLP:~# ps -w
PID USER VSZ STAT COMMAND
1 root 2324 S init
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [kworker/0:0]
5 root 0 SW< [kworker/0:0H]
6 root 0 SW [kworker/u2:0]
7 root 0 SW [rcu_preempt]
8 root 0 SW [rcu_bh]
9 root 0 SW [rcu_sched]
10 root 0 SW< [khelper]
11 root 0 SW< [writeback]
12 root 0 SW< [bioset]
13 root 0 SW< [kblockd]
14 root 0 SW [khubd]
15 root 0 SW [kworker/0:1]
16 root 0 SW [kswapd0]
17 root 0 SW [fsnotify_mark]
18 root 0 SW< [crypto]
46 root 0 SW [kworker/u2:2]
47 root 0 SW< [deferwq]
50 root 0 SW< [kworker/0:1H]
277 root 2324 S -ash
292 root 0 DW [reset_thread]
303 root 0 SW< [cryptodev_queue]
316 root 864 S /sbin/hotplug2 --override --persistent --set-rules-file /etc/hotplug2.rules --set-coldplug-cmd /sbin/udev
332 root 888 S /sbin/ubusd
359 root 8036 S tp_manage
394 root 3420 S /usr/bin/ledd
396 root 3220 S /usr/sbin/netlinkd
399 root 5464 S < /usr/bin/system_state_audio
473 root 1636 S /sbin/netifd
474 root 1516 S /usr/sbin/connModed
479 root 1528 S /usr/sbin/connModed
485 root 10124 S /usr/sbin/wlan-manager
609 root 0 SW [RTW_CMD_THREAD]
651 root 1200 S wpa_supplicant -B -Dwext -iwlan0 -P/tmp/supplicant_pid -C/var/run/wpa_supplicant -bbr-wan
677 root 13516 S /usr/bin/dsd
705 root 4412 S /bin/cloud-brd -c /var/etc/cloud_brd_conf
800 root 14972 S /bin/cloud-client
804 root 13764 S /bin/cloud-service
1072 root 3876 S /usr/sbin/uhttpd -f -h /www -T 180 -A 0 -n 8 -R -r C200 -C /tmp/uhttpd.crt -K /tmp/uhttpd.key -s 443
1082 root 5880 S /usr/bin/rtspd
1084 root 5988 S /usr/bin/relayd
1092 root 7196 S /usr/bin/p2pd
1096 root 11144 S /bin/dn_switch
1098 root 4200 S /bin/storage_manager
1138 root 39736 R /bin/cet
1192 root 30360 S /bin/vda
1198 root 3804 S /bin/wtd
1206 root 11344 S /bin/nvid
1258 root 2324 S udhcpc -p /var/run/static-dhcpc.pid -s /lib/netifd/static-dhcp.script -f -t 0 -i br-wan -r 10.1.3.247 -H
1344 root 2328 S /usr/sbin/ntpd -n -p time.nist.gov -p 128.138.140.44 -p 192.36.144.22 -p time-a.nist.gov -p time-b.nist.g
1359 root 3840 S /usr/bin/motord
3887 root 2320 S telnetd -l /bin/sh -F
3900 root 2324 S /bin/sh
3918 root 2320 R ps -w
Network daemons
root@SLP:~# netstat -lnp
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:8800 0.0.0.0:* LISTEN 1138/cet
tcp 0 0 127.0.0.1:929 0.0.0.0:* LISTEN 1092/p2pd
tcp 0 0 0.0.0.0:20002 0.0.0.0:* LISTEN 359/tp_manage
tcp 0 0 0.0.0.0:2020 0.0.0.0:* LISTEN 1206/nvid
tcp 0 0 0.0.0.0:554 0.0.0.0:* LISTEN 1138/cet
tcp 0 0 0.0.0.0:23 0.0.0.0:* LISTEN 3887/telnetd
tcp 0 0 127.0.0.1:921 0.0.0.0:* LISTEN 1084/relayd
tcp 0 0 127.0.0.1:922 0.0.0.0:* LISTEN 1082/rtspd
tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 1072/uhttpd
udp 0 0 0.0.0.0:20002 0.0.0.0:* 359/tp_manage
udp 0 0 0.0.0.0:3702 0.0.0.0:* 1206/nvid
Filesystems
root@SLP:~# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 2.5M 2.5M 0 100% /rom
tmpfs 19.8M 1012.0K 18.8M 5% /tmp
tmpfs 512.0K 0 512.0K 0% /dev
rwroot 19.8M 24.0K 19.8M 0% /overlay
/dev/mtdblock7 3.5M 3.5M 0 100% /rom/sp_rom
overlayfs:/overlay 3.5M 3.5M 0 100% /rom/mnt
overlayfs:/overlay 19.8M 24.0K 19.8M 0% /
Root password
The root password on this firmware version has changed and is no longer 'slprealtek' as discovered by kubik369 and documented on the Tapo C200 research site. The root hash is now set to:
root:$1$IjsWXCH9$z2Woc0uNFN4a7bZM7SGCF.:0:0:root:/root:/bin/ash
RTSP
RTSP works out of the box after you enable it with the Tapo app. You must set a username and password.
There are two streams that are enabled with this option.
- Full resolution -
rtsp://username:password@$IP/stream1 - 360p resolution -
rtsp://username:password@$IP/stream2
Hack ideas
Anyway to side load a hack via SDCard?
- Don't see anything that reads the sdcard in the boot process
- uboot doesn't seem to read the SD card, but can we tweak it so it does?
- Tack on a ESP8266 to control the boot process? (eg. set boot options / password / start telnet via serial on each boot)
- Flash the desired changes and lock out any firmware upgrades?