Gosund KS602: Difference between revisions
From Leo's Notes
This page was last edited on 10 June 2021, at 04:05.
Created page with "Configuration Tasmota template {{Highlight | code = {"NAME":"Gosund KS-602","GPIO":[32,0,320,0,0,0,0,0,0,0,224,0,290,0],"FLAG":0,"BASE":18} | lang = terminal }}" |
No edit summary |
||
| Line 1: | Line 1: | ||
[[File:Gosund KS602 Smart Plug Reflash.jpg|alt=Gosund KS602 Smart Plug Reflash|thumb|Gosund KS602 Smart Plug Reflash]] | |||
The Gosund KS602 is a smart switch which I bought for around $28 CAD for two ($14 CAD each). It has a ESP8266 and can run Tasmota. The unit is very simple to open and easy to reflash with Tasmota. | |||
Tasmota template | == Configuration == | ||
After flashing Tasmota, I had to configure my unit with the following template since the one on https://templates.blakadder.com/ did not work for me. This template will have the LEDs turn green when on and red when off.{{Highlight | |||
{{Highlight | |||
| code = {"NAME":"Gosund KS-602","GPIO":[32,0,320,0,0,0,0,0,0,0,224,0,290,0],"FLAG":0,"BASE":18} | | code = {"NAME":"Gosund KS-602","GPIO":[32,0,320,0,0,0,0,0,0,0,224,0,290,0],"FLAG":0,"BASE":18} | ||
| lang = terminal | | lang = terminal | ||
}} | }} | ||
Revision as of 04:05, 10 June 2021
The Gosund KS602 is a smart switch which I bought for around $28 CAD for two ($14 CAD each). It has a ESP8266 and can run Tasmota. The unit is very simple to open and easy to reflash with Tasmota.
Configuration
After flashing Tasmota, I had to configure my unit with the following template since the one on https://templates.blakadder.com/ did not work for me. This template will have the LEDs turn green when on and red when off.
{"NAME":"Gosund KS-602","GPIO":[32,0,320,0,0,0,0,0,0,0,224,0,290,0],"FLAG":0,"BASE":18}