Infiniband: Difference between revisions

From Leo's Notes
This page was last edited on 25 February 2020, at 21:47.
Created page with " == Commands == Here are some commands when working with Infiniband. {| class=wikitable ! width="25%" | Command ! width="75%" | Description |- | {{code|ibcheckwidth}} || |-..."
 
Line 36: Line 36:


== See Also ==
== See Also ==
* https://ieeexplore.ieee.org/document/7092697
* https://ieeexplore.ieee.org/document/7092697
* IP over Infiniband info - https://www.kernel.org/doc/Documentation/infiniband/ipoib.txt

Revision as of 21:47, 25 February 2020

Commands

Here are some commands when working with Infiniband.

Command Description
ibcheckwidth
ibdiagnet Shows diagnostic information about the network. Example commands:
# ibdiagnet --pc -P all=1 -get_phy_info --extended_speed all --pm_per_lane \
     --get_cable_info --cable_info_disconnected --pm_pause_time 600 -o /tmp/ibdiagnet_ibm
# ibdiagnet -P symbol_error_counter=1
ibnetdiscover Discovers the network topology. Pipe stdout to /dev/null to look for any errors.
# ibnetdiscover > /dev/null
ibqueryerrors Looks for any errors.
# ibqueryerrors -s PortXmitWait,LinkErrorRecoveryCounter,PortRcvSwitchRelayErrors,\
LinkDownedCounter,PortXmitDiscards,VL15Dropped,PortRcvErrors,PortRcvRemotePhysicalErrors
ibstat Shows port statistics
ibswitches Shows switches on the network
ibv_devinfo Shows the Infiniband device information.


See Also