Arduino: Difference between revisions
From Leo's Notes
This page was last edited on 24 February 2017, at 23:43.
No edit summary |
|||
| Line 1: | Line 1: | ||
== Programming the Arduino Mini == | == Programming the Arduino Mini == | ||
[[File:Arduino_Uno_to_Mini_Connection.png|350px|thumb|right|Arduino Uno/Duemilanove to Mini Connection]] | |||
You can use a regular Arduino Uno or Duemilanove to program an Arduino Mini. To do so: | You can use a regular Arduino Uno or Duemilanove to program an Arduino Mini. To do so: | ||
# Connect GND and VCC from the Arduino Uno to the Arduino Mini | # Connect GND and VCC from the Arduino Uno to the Arduino Mini | ||
Revision as of 23:43, 24 February 2017
Programming the Arduino Mini

You can use a regular Arduino Uno or Duemilanove to program an Arduino Mini. To do so:
- Connect GND and VCC from the Arduino Uno to the Arduino Mini
- Pull the Atmega 328 from the Arduino Uno
- Connect RX (Pin 0) and TX (Pin 1) from the Arduino Uno to the Arduino Mini
Then program the Arduino as you normally would while making sure that the board selected in the Arduino IDE is set to the Arduino Mini.