IPTables

Prerouting Chain

This is the first chain that traffic will go through. It contains the following tables:

1. raw
2. connection tracking
3. mangle
4. destination / NAT

Drop RFC3330

You may wish to drop Special-Use IP addresses defined in RFC 3330. These IPs include internally routed addresses such as 192.168.0.0/16, 10.0.0.0/8, etc., black-hole addresses such as 0.0.0.0, and multicast addresses such as 224.0.0.0/4. There should be no reason for these addresses to be coming in externally and when it does happen, it's probably a spoofed address.

#
# DROP RFC3330
#
$IPT -t mangle -A PREROUTING -s 0.0.0.0/8 -j DROP               -m comment  --comment "0.0.0.0/8 source"
$IPT -t mangle -A PREROUTING -d 0.0.0.0/8 -j DROP               -m comment  --comment "0.0.0.0/8 destination"
$IPT -t mangle -A PREROUTING -s 10.0.0.0/8 -j DROP           -m comment  --comment "10.0.0.0/8 source"
$IPT -t mangle -A PREROUTING -d 10.0.0.0/8 -j DROP           -m comment  --comment "10.0.0.0/8 destination"
$IPT -t mangle -A PREROUTING -s 100.64.0.0/10 -j DROP           -m comment  --comment "100.64.0.0/10 source"
$IPT -t mangle -A PREROUTING -d 100.64.0.0/10 -j DROP           -m comment  --comment "100.64.0.0/10 destination"
$IPT -t mangle -A PREROUTING -s 169.254.0.0/16 -j DROP          -m comment  --comment "169.254.0.0/16 source"
$IPT -t mangle -A PREROUTING -d 169.254.0.0/16 -j DROP          -m comment  --comment "169.254.0.0/16 destination"
$IPT -t mangle -A PREROUTING -s 172.16.0.0/12 -j DROP           -m comment  --comment "172.16.0.0/12"
$IPT -t mangle -A PREROUTING -d 172.16.0.0/12 -j DROP           -m comment  --comment "172.16.0.0/12"
$IPT -t mangle -A PREROUTING -s 192.0.2.0/24 -j DROP            -m comment  --comment "192.0.2.0/24 source"
$IPT -t mangle -A PREROUTING -d 192.0.2.0/24 -j DROP            -m comment  --comment "192.0.2.0/24 destination"
$IPT -t mangle -A PREROUTING -s 192.168.0.0/16 -j DROP          -m comment  --comment "192.168.0.0/16 source"
$IPT -t mangle -A PREROUTING -d 192.168.0.0/16 -j DROP          -m comment  --comment "192.168.0.0/16 destination"
$IPT -t mangle -A PREROUTING -s 198.18.0.0/15 -j DROP           -m comment  --comment "198.18.0.0/15 source"
$IPT -t mangle -A PREROUTING -d 198.18.0.0/15 -j DROP           -m comment  --comment "198.18.0.0/15 destination"
$IPT -t mangle -A PREROUTING -s 198.51.100.0/24 -j DROP         -m comment  --comment "198.51.100.0/24 source"
$IPT -t mangle -A PREROUTING -d 198.51.100.0/24 -j DROP         -m comment  --comment "198.51.100.0/24 destination"
$IPT -t mangle -A PREROUTING -s 203.0.113.0/24 -j DROP          -m comment  --comment "203.0.113.0/24 source"
$IPT -t mangle -A PREROUTING -d 203.0.113.0/24 -j DROP          -m comment  --comment "203.0.113.0/24 destination"

# Special usue IPs, including 255.255.255.255.
$IPT -t mangle -A PREROUTING -s 240.0.0.0/4 -j DROP             -m comment  --comment "240.0.0.0/4 source"
$IPT -t mangle -A PREROUTING -d 240.0.0.0/4 -j DROP             -m comment  --comment "240.0.0.0/4 destination"

# We shouldn't be routing multicast.
$IPT -t mangle -A PREROUTING -s 244.0.0.0/4 -j DROP             -m comment  --comment "244.0.0.0/4 source"
$IPT -t mangle -A PREROUTING -d 244.0.0.0/4 -j DROP             -m comment  --comment "244.0.0.0/4 destination"

# Loopback not allowed unless on the local loopback interface.
$IPT -t mangle -A PREROUTING -s 127.0.0.0/8 ! -i lo -j DROP     -m comment  --comment "127.0.0.0/8 source, DROP except on the loopback"
$IPT -t mangle -A PREROUTING -d 127.0.0.0/8 ! -i lo -j DROP     -m comment  --comment "127.0.0.0/8 destination, DROP except on the loopback"

Redirect Outgoing Traffic to Local Port

To redirect traffic destined to 1.2.3.4:443 to localhost:8080, use the REDIRECT directive:

iptables -t nat -A OUTPUT -p tcp -d 1.2.3.4 --dport 443 -j REDIRECT --to-ports 8080

If you want to redirect traffic to a particular destination rather than 127.0.0.1 (or the primary interface's IP) use DNAT:

iptables -t nat -A OUTPUT -p udp -d 1.2.3.4 --dport 443 -j DNAT --to-destination 9.8.7.6:8080