SolusVM: Difference between revisions
From Leo's Notes
This page was last edited on 8 May 2013, at 03:56.
No edit summary |
|||
| Line 1: | Line 1: | ||
== Installation == | == Master Installation == | ||
Use the guide at http://docs.solusvm.com/installation | Use the guide at http://docs.solusvm.com/installation | ||
| Line 119: | Line 119: | ||
</syntaxhighlight> | </syntaxhighlight> | ||
== KVM Bridge Setup == | |||
Follow the instructions at http://docs.solusvm.com/kvm_bridge_setup | |||
However, you'll most probably have a broken network after following their steps. Ensure that you have only the following files defined: | |||
[root@default network-scripts]# cat ifcfg-eth0 | |||
DEVICE="eth0" | |||
HWADDR="00:0C:29:16:BB:F8" | |||
IPV6INIT="yes" | |||
ONBOOT="yes" | |||
UUID="f3f6c48c-09fe-4991-94a3-794fdc637c1b" | |||
BRIDGE="br0" | |||
[root@default network-scripts]# cat ifcfg-br0 | |||
DEVICE=br0 | |||
TYPE=Bridge | |||
BOOTPROTO=static | |||
IPADDR=172.20.1.239 | |||
NETMASK=255.255.255.0 | |||
ONBOOT=yes | |||
DELAY=0 | |||
[root@default network-scripts]# cat /etc/sysconfig/network | |||
NETWORKING=yes | |||
HOSTNAME=default | |||
gateway=172.20.1.1 | |||
== Troubleshooting == | == Troubleshooting == | ||
Revision as of 03:56, 8 May 2013
Master Installation
Use the guide at http://docs.solusvm.com/installation
Before you start, ensure you have PHP installed at /usr/bin/php, otherwise the installer will bail. You will also need glibc.i686 for SolusVM's prebuilt binaries to run. Without this, you will have a bad time getting the control panel to work.
yum -y install wget php-cli glibc.i686
[root@default ~]# ./install
o----------------------------------------------------------------o
| :: SolusVM Installer v3.0.1 (2012/09/13) |
o----------------------------------------------------------------o
| |
| Full instructions and information on the usage of this |
| installer are located at the following link: |
| |
| http://install.solusvm.info |
| |
| If at any point you encounter an error with installation |
| you can refer to the following generated logs: |
| |
| /tmp/preinstall.log |
| /tmp/install.log |
| |
| Hit [ENTER] to continue or ctrl+c to exit |
| |
o----------------------------------------------------------------o
o----------------------------------------------------------------o
| :: SolusVM Installer v3.0.1 (2012/09/13) |
o----------------------------------------------------------------o
| |
| What Operating System is installed on this server? |
| |
| [1] RHEL 5.x (RHEL 5, CentOS 5, Scientific Linux 5) |
| [2] RHEL 6.x (RHEL 6, CentOS 6, Scientific Linux 6) |
| |
o----------------------------------------------------------------o
Choose an option (1/2): 2
o----------------------------------------------------------------o
| :: SolusVM Installer v3.0.1 (2012/09/13) |
o----------------------------------------------------------------o
| |
| What version of SolusVM would you like to install? |
| |
| [1] SolusVM Version 1 (latest stable version) |
| [-] SolusVM Version 2 (currently unreleased) |
| |
o----------------------------------------------------------------o
Choose an option (1): 1
cat: /tmp/svmversion.txt: No such file or directory
o----------------------------------------------------------------o
| :: SolusVM Installer v3.0.1 (2012/09/13) |
o----------------------------------------------------------------o
| |
| What file mirror would you like to use? |
| |
| [1] Automatic (Fastest Mirror) |
| [2] Europe (France) |
| [3] Europe (United Kingdom) |
| [4] USA (Texas) |
| [5] USA (Arizona) |
| |
o----------------------------------------------------------------o
Choose an option (1/2/3/4/5): 4
o----------------------------------------------------------------o
| :: SolusVM Installer v3.0.1 (2012/09/13) |
o----------------------------------------------------------------o
| |
| What SolusVM type would you like to install? |
| |
| [1] Master With No Virtualization |
| [2] Master With OpenVZ Virtualization |
| |
| [3] Slave With No Virtualization |
| [4] Slave With OpenVZ Virtualization |
| [5] Slave With Xen Virtualization |
| [6] Slave With KVM Virtualization |
| |
| If you don't want to include the default os templates you |
| may use the 'no' flag in your option. i.e 1no, 2no etc... |
| |
o----------------------------------------------------------------o
Choose an option (1/1no/2/2no/3/3no/4/4no/5/5no/6/6no): 6
Please Wait, Installing Dependencies for RHEL 6...
Processing, please wait...
Installing SSL Certificate...
Installing WebServer...
Starting WebServer...
Downloading Installation Files...
Downloading Basic Templates...
Installing KVM for RHEL 6...
Installation Complete!
Installation log : /tmp/install.log
Add this slave to your SolusVM master using the following details:
ID Key .......... : KG9GCROY0KXGXQOOREMQ8KSTEDI20FCB51LIKJWT
ID Password ..... : 5WUX29HDKRDMSYQZS4AXRDY35BCVF0FFR5HN209
IMPORTANT!! You need to setup a network bridge before you can use KVM on this server.
Please see the following link: http://wiki.solusvm.com/index.php/KVM_Network_Bridge_Setup
Please set SELINUX=disabled in /etc/selinux/config before rebooting.
Thankyou for choosing SolusVM.
KVM Bridge Setup
Follow the instructions at http://docs.solusvm.com/kvm_bridge_setup
However, you'll most probably have a broken network after following their steps. Ensure that you have only the following files defined:
[root@default network-scripts]# cat ifcfg-eth0 DEVICE="eth0" HWADDR="00:0C:29:16:BB:F8" IPV6INIT="yes" ONBOOT="yes" UUID="f3f6c48c-09fe-4991-94a3-794fdc637c1b" BRIDGE="br0" [root@default network-scripts]# cat ifcfg-br0 DEVICE=br0 TYPE=Bridge BOOTPROTO=static IPADDR=172.20.1.239 NETMASK=255.255.255.0 ONBOOT=yes DELAY=0
[root@default network-scripts]# cat /etc/sysconfig/network NETWORKING=yes HOSTNAME=default gateway=172.20.1.1
Troubleshooting
vpsadmin / vpsadmin does not work after installation
Symptom: When you are trying to login for the first time at http://ip:5353/admincp/login.php with vpsadmin/vpsadmin, you do not get past the login screen without any error messages.
Solution: Ensure glib.i686 is installed.
License
The license that I had requested follows:
License Type: SolusVM Enterprise Trial License
License Key: SVMTL-J8NAS-XO82W-HNEXY-8GNS0-9HKA1-WCL4R
Status: Active
Registration Date: 7th May 2013
First Payment Amount: $0.00 USD
Recurring Amount: $0.00 USD
Billing Cycle: Free Account
Payment Method: PayPal
Valid IP:
License Status: Reissued