Dell OpenManage: Difference between revisions

From Leo's Notes
This page was last edited on 5 January 2017, at 20:02.
← Older editNewer edit →
VisualWikitext
mNo edit summary
Line 81: Line 81:
}}
}}


=== Open Mange Configuration Utility (omreport) ===
=== Open Mange Configuration Utility (omconfig) ===


==== Creating a new RAID ====
==== Creating a new vdisk ====


Suppose you need to create a new vdisk after inserting a disk into a server. Use <code>omconfig</code> to set up the disk.
Suppose you need to create a new vdisk after inserting a new disk into an empty slot on your server. Use {{code|omconfig}} to set up the disk.


Find the disk using {{code|1=./omreport storage pdisk controller=0}}. If you're not sure what controller ID to use, you can find it by running {{code|1=./omreport storage controller}}.
Find the disk using {{code|1=./omreport storage pdisk controller=0}}. If you're not sure what controller ID to use, you can find it by running {{code|1=./omreport storage controller}}.
Line 102: Line 102:
}}
}}


Then, create the vdisk using the disk above.
To create the vdisk using the disk above:
{{highlight|lang=terminal|code=
{{highlight|lang=terminal|code=
root@server:/opt/dell/srvadmin/sbin# ./omconfig storage controller controller=0 action=createvdisk raid=r0 size=max pdisk=0:1:6 writepolicy=wb name=backup
# ./omconfig storage controller controller=0 action=createvdisk raid=r0 size=max pdisk=0:1:6 writepolicy=wb name=disk06
Command successful!
}}
 
 
 
==== Wiping Foreign Configs ====
To wipe foreign configs on all drives attached to a controller:
 
{{highlight|lang=terminal|code=
# omconfig storage controller action=clearforeignconfig controller=1
Command successful!
Command successful!
}}
}}

Revision as of 20:02, 5 January 2017

This page will focus on Dell OpenManage on Linux only.

Installation

Install Dell's OpenManage programs from their repository available at http://linux.dell.com/repo/hardware/. You can either manually install the packages or run their bootstraper script to install their repository. 

## From http://linux.dell.com/repo/hardware/DSU_16.12.00/
# wget -q -O - http://linux.dell.com/repo/hardware/latest/bootstrap.cgi

Once installed, the binaries can be found in /opt/dell/srvadmin/bin. You may want to append this path to your PATH variable. 

# PATH=$PATH:/opt/dell/srvadmin/bin

You may also need to manually start some services such as the data engine service in order to query hardware information about storage systems by running /opt/dell/srvadmin/sbin/dsm_sa_datamgrd.

Usage

Open Manage Report Utility (omreport)

Run omreport -? for a list of available options on your system.

Storage System

To monitor your server's RAID array, run: 

# omreport storage pdisk controller=0

Open Mange Configuration Utility (omconfig)

Creating a new vdisk

Suppose you need to create a new vdisk after inserting a new disk into an empty slot on your server. Use omconfig to set up the disk.

Find the disk using ./omreport storage pdisk controller=0. If you're not sure what controller ID to use, you can find it by running ./omreport storage controller. 

Controller PERC H710 Mini (Embedded)
ID                              : 0:1:6
Status                          : Non-Critical
Name                            : Physical Disk 0:1:6
State                           : Ready
Power Status                    : Spun Up
Bus Protocol                    : SATA
Media                           : HDD
...
Capacity                        : 465.25 GB (499558383616 bytes)

To create the vdisk using the disk above: 

# ./omconfig storage controller controller=0 action=createvdisk raid=r0 size=max pdisk=0:1:6 writepolicy=wb name=disk06
Command successful!


Wiping Foreign Configs

To wipe foreign configs on all drives attached to a controller: 

# omconfig storage controller action=clearforeignconfig controller=1
Command successful!

See Also