Cisco
From Leo's Notes
Last edited on 30 December 2021, at 02:10.
Show Switchport[edit | edit source]
sola# config Enter configuration commands, one per line. End with CNTL/Z. sola(config)# interface ethernet 3/28 sola(config-if)# show interface ethernet 3/28 switchport Name: Ethernet3/28 Switchport: Enabled Switchport Monitor: Not enabled Operational Mode: trunk Access Mode VLAN: 1 (default) Trunking Native Mode VLAN: 1 (default) Trunking VLANs Enabled: 1-12,14-3967,4048-4093 Administrative private-vlan primary host-association: none Administrative private-vlan secondary host-association: none Administrative private-vlan primary mapping: none Administrative private-vlan secondary mapping: none Administrative private-vlan trunk native VLAN: none Administrative private-vlan trunk encapsulation: dot1q Administrative private-vlan trunk normal VLANs: none Administrative private-vlan trunk private VLANs: none Operational private-vlan: none