Samba

From Leo's Notes
Revision as of 05:27, 22 July 2021 by Leo (talk | contribs)
This page was last edited on 22 July 2021, at 05:27.

Tasks

Authenticating Samba against LDAP

The following steps will guide you on how to set up Samba to authenticate against a clean install LDAP server. I will be using OpenLDAP from the osixia/openldap docker image.

Once your LDAP server is ready, populate it with the required samba groups and users. The best way is to use the smbldap-tools package. On the samba server, install the following packages. 

# yum -y install smbldap-tools samba samba-common-tools

Configure samba. At the very least, you should have the following in /etc/samba/smb.conf. You must specify a bind DN that has read/write access to the LDAP directory. 

[global]
   workgroup = WORKGROUP

   passdb backend = ldapsam:ldap://ldap.home.steamr.com
   ldap suffix = dc=home,dc=steamr,dc=com
   ldap admin dn = cn=admin,dc=home,dc=steamr,dc=com
   ldap user suffix = ou=users
   ldap machine suffix = ou=computers
   ldap group suffix = ou=group
   ldap passwd sync = yes
   ldap ssl = no

   server string = Samba Server
   security = user
   hosts allow = 10.
   log file = /var/log/samba/log.%m

Configure smbldap-tools. The configuration for this is at /etc/smbldap-tools/smbldap.conf. At the minimum, you should have this: 

sambaDomain="WORKGROUP"
slaveLDAP="ldap.home.steamr.com"
slavePort="389"
masterLDAP="ldap.home.steamr.com"
masterPort="389"
ldapTLS="0"
suffix="dc=home,dc=steamr,dc=com"
usersdn="ou=users,${suffix}"
computersdn="ou=computers,${suffix}"
groupsdn="ou=group,${suffix}"
idmapdn="ou=Idmap,${suffix}"

Next, use the smbldap-populate tool to populate the LDAP directory. Note that a bunch of OUs, groups, and default users will be created. The tool will also ask for a new password for the root account that was just added to the directory. 

# smbldap-populate
Populating LDAP directory for domain WORKGROUP (S-1-5-21-2049073866-1371207509-1214748462)
(using builtin directory structure)

entry dc=home,dc=steamr,dc=com already exist.
adding new entry: ou=users,dc=home,dc=steamr,dc=com
adding new entry: ou=group,dc=home,dc=steamr,dc=com
adding new entry: ou=computers,dc=home,dc=steamr,dc=com
adding new entry: ou=Idmap,dc=home,dc=steamr,dc=com
adding new entry: sambaDomainName=WORKGROUP,dc=home,dc=steamr,dc=com
adding new entry: uid=root,ou=users,dc=home,dc=steamr,dc=com
adding new entry: uid=nobody,ou=users,dc=home,dc=steamr,dc=com
adding new entry: cn=Domain Admins,ou=group,dc=home,dc=steamr,dc=com
adding new entry: cn=Domain Users,ou=group,dc=home,dc=steamr,dc=com
adding new entry: cn=Domain Guests,ou=group,dc=home,dc=steamr,dc=com
adding new entry: cn=Domain Computers,ou=group,dc=home,dc=steamr,dc=com
adding new entry: cn=Administrators,ou=group,dc=home,dc=steamr,dc=com
adding new entry: cn=Account Operators,ou=group,dc=home,dc=steamr,dc=com
adding new entry: cn=Print Operators,ou=group,dc=home,dc=steamr,dc=com
adding new entry: cn=Backup Operators,ou=group,dc=home,dc=steamr,dc=com
adding new entry: cn=Replicators,ou=group,dc=home,dc=steamr,dc=com

Please provide a password for the domain root:
Changing UNIX and samba passwords for root
New password:
Retype new password:

Next, add any users or groups as needed: 

## Add a new group and user, then set their password
# smbldap-groupadd -a -g 1000 leo
# smbldap-useradd -a -u 1000 -G "Domain Users,leo" leo
# smbpasswd -a leo

Start samba. Confirm whether the samba server has the appropriate domain SID. If it isn't defined, set it. 

## Start samba
# systemctl start smbd

## Ensure domain SID is set. If it isn't, as shown below, you will need to find the domain SID and then set it.
# net getdomainsid
SID for local machine BNAS is: S-1-5-21-2431635136-3205909659-925170555
Could not fetch domain SID

## Find the domain's SID by looking at the SID value in the LDAP server.
# net setdomainsid S-1-5-21-2049073866-1371207509-1214748462

At this point, the LDAP users you added via smbldap-useradd should be able to authenticate to this samba server.

Validating samba configuration

testparm to test the smb.conf file

Troubleshooting

NT_STATUS_INVALID_SID error from check_sam_security

Security ID structure invalid error when mounting a network drive
Security ID structure invalid error when mounting a network drive

When trying to get the Samba server to use LDAP authentication, I was unable to get a user to properly authenticate. After entering a correct password, Windows will show a "The security ID structure is invalid" error.

On the samba server, the following messages are also visible in the logs:

[2021/07/20 11:39:01.893994,  0] ../../source3/auth/check_samsec.c:493(check_sam_security)
  check_sam_security: make_server_info_sam() failed with 'NT_STATUS_INVALID_SID'
[2021/07/20 11:39:01.948641,  0] ../../source3/auth/check_samsec.c:493(check_sam_security)
  check_sam_security: make_server_info_sam() failed with 'NT_STATUS_INVALID_SID'
[2021/07/20 11:39:01.989452,  0] ../../source3/auth/check_samsec.c:493(check_sam_security)
  check_sam_security: make_server_info_sam() failed with 'NT_STATUS_INVALID_SID'

Additionally, pdbedit will show that some SID is does not belong in our domain and net getdomainsid will show that the domain SID is unavailable. 

# pdbedit -L
sid S-1-5-21-356073995-1563379822-1369847962-1001 does not belong to our domain

# net getdomainsid
SID for local machine BNAS is: S-1-5-21-2431635136-3205909659-925170350
Could not fetch domain SID

The cause of this issue is that the samba server is not properly connected to the workgroup / domain. As a result, the NT_STATUS_INVALID_SID code will be returned during the authentication process.

Solution: When using just vanilla LDAP, the only way I am able to get the domain SID to match was to set it manually. This can be set by running: 

## Set your domain SID
# net setdomainsid S-1-5-21-2049073866-1371207509-1214748462

See Also