Tasmota
From Leo's Notes
This page was last edited on 8 May 2021, at 07:57.
Formatting
| Description | What you type | What you get |
|---|---|---|
| %06X | 0353C0 | |
| last 4 digits of mac | %04d | |
| hostname | %s | |
| MQTT prefix | %prefix% | One of: cmnd, stat, tele
|
| MQTT topic | %topic% | User defined. Eg: WP5-1
|
Configuration
After a factory reset, you will need to configure its WiFi settings manually by connecting to the WifiManager created access point. After it connects to the proper network, connect to it again through a web browser and then set up:
- The device template. Remember to check off 'activate' or else the template won't get applied.
- MQTT. The host as
mqtt, port as1883, topic as the device name, and the prefix astasmota/%topic%/