Ipmitool: Difference between revisions
From Leo's Notes
This page was last edited on 8 January 2019, at 02:01.
Created page with "* https://github.com/ipmitool/ipmitool {{highlight|lang=terminal|code= $ autoconf configure.ac:8: error: possibly undefined macro: AM_INIT_AUTOMAKE If this token and ot..." |
No edit summary |
||
| Line 1: | Line 1: | ||
{{code|ipmitool}} is a utility to fetch information from devices that support the Intelligent Platform Management Interface. This includes servers such as the HP Proliant DL380 G6 which I have at home. | |||
The project can be found at: | |||
* https://github.com/ipmitool/ipmitool | * https://github.com/ipmitool/ipmitool | ||
== Installation == | |||
Clone the repository from https://github.com/ipmitool/ipmitool, then run {{code|autoconf}}, {{code|./configure}}, {{code|make}}. | |||
A docker image containing this binary can be found at: | |||
* https://git.steamr.com/docker/alpine-ipmitool | |||
== Usage == | |||
Poll the data from iLO by running {{code|ipmitool}}. An example output is given below. | |||
{{highlight|lang=terminal|code= | |||
/tmp # ./ipmitool -I lanplus -H X.X.X.X -U Administrator -P XXXXXXXXXX sensor | |||
Unable to Get Channel Cipher Suites | |||
UID Light | 0x0 | discrete | 0x0080| na | na | na | na | na | na | |||
Sys. Health LED | 0x0 | discrete | 0x0080| na | na | na | na | na | na | |||
Power Supply 1 | 85 | Watts | ok | na | na | na | na | na | na | |||
Power Supply 2 | 95 | Watts | ok | na | na | na | na | na | na | |||
Power Supplies | 0x0 | discrete | 0x0180| na | na | na | na | na | na | |||
Fan 1 | 13.720 | percent | ok | na | na | na | na | na | na | |||
Fan 2 | 13.720 | percent | ok | na | na | na | na | na | na | |||
Fan 3 | 22.736 | percent | ok | na | na | na | na | na | na | |||
Fan 4 | 27.048 | percent | ok | na | na | na | na | na | na | |||
Fan 5 | 22.736 | percent | ok | na | na | na | na | na | na | |||
Fan 6 | 13.720 | percent | ok | na | na | na | na | na | na | |||
Fans | 0x0 | discrete | 0x0180| na | na | na | na | na | na | |||
Temp 1 | 19.000 | degrees C | ok | 0.000 | 0.000 | 0.000 | 39.000 | 41.000 | 45.000 | |||
Temp 2 | 40.000 | degrees C | ok | 0.000 | 0.000 | 0.000 | 0.000 | 82.000 | 83.000 | |||
Temp 3 | 40.000 | degrees C | ok | 0.000 | 0.000 | 0.000 | 0.000 | 82.000 | 83.000 | |||
Temp 4 | 37.000 | degrees C | ok | 0.000 | 0.000 | 0.000 | 0.000 | 87.000 | 92.000 | |||
Temp 5 | 39.000 | degrees C | ok | 0.000 | 0.000 | 0.000 | 0.000 | 87.000 | 92.000 | |||
Temp 6 | 44.000 | degrees C | ok | 0.000 | 0.000 | 0.000 | 0.000 | 87.000 | 92.000 | |||
Temp 7 | 42.000 | degrees C | ok | 0.000 | 0.000 | 0.000 | 0.000 | 87.000 | 92.000 | |||
Temp 8 | 48.000 | degrees C | ok | 0.000 | 0.000 | 0.000 | 0.000 | 90.000 | 95.000 | |||
Temp 9 | 42.000 | degrees C | ok | 0.000 | 0.000 | 0.000 | 0.000 | 65.000 | 70.000 | |||
Temp 10 | 48.000 | degrees C | ok | 0.000 | 0.000 | 0.000 | 0.000 | 90.000 | 95.000 | |||
Temp 11 | 40.000 | degrees C | ok | 0.000 | 0.000 | 0.000 | 0.000 | 70.000 | 75.000 | |||
Temp 12 | 49.000 | degrees C | ok | 0.000 | 0.000 | 0.000 | 0.000 | 90.000 | 95.000 | |||
Temp 13 | na | | na | 0.000 | 0.000 | 0.000 | 0.000 | 70.000 | 75.000 | |||
Temp 14 | na | | na | 0.000 | 0.000 | 0.000 | 0.000 | 70.000 | 75.000 | |||
Temp 15 | na | | na | 0.000 | 0.000 | 0.000 | 0.000 | 70.000 | 75.000 | |||
Temp 16 | na | | na | 0.000 | 0.000 | 0.000 | 0.000 | 70.000 | 75.000 | |||
Temp 17 | na | | na | 0.000 | 0.000 | 0.000 | 0.000 | 70.000 | 75.000 | |||
Temp 18 | na | | na | 0.000 | 0.000 | 0.000 | 0.000 | 70.000 | 75.000 | |||
Temp 19 | 24.000 | degrees C | ok | 0.000 | 0.000 | 0.000 | 0.000 | 70.000 | 75.000 | |||
Temp 20 | 36.000 | degrees C | ok | 0.000 | 0.000 | 0.000 | 0.000 | 70.000 | 75.000 | |||
Temp 21 | 34.000 | degrees C | ok | 0.000 | 0.000 | 0.000 | 0.000 | 80.000 | 85.000 | |||
Temp 22 | 32.000 | degrees C | ok | 0.000 | 0.000 | 0.000 | 0.000 | 80.000 | 85.000 | |||
Temp 23 | 43.000 | degrees C | ok | 0.000 | 0.000 | 0.000 | 0.000 | 77.000 | 82.000 | |||
Temp 24 | 38.000 | degrees C | ok | 0.000 | 0.000 | 0.000 | 0.000 | 70.000 | 75.000 | |||
Temp 25 | 39.000 | degrees C | ok | 0.000 | 0.000 | 0.000 | 0.000 | 70.000 | 75.000 | |||
Temp 26 | 38.000 | degrees C | ok | 0.000 | 0.000 | 0.000 | 0.000 | 70.000 | 75.000 | |||
Temp 27 | na | | na | 0.000 | 0.000 | 0.000 | 0.000 | 70.000 | 75.000 | |||
Temp 28 | na | | na | 0.000 | 0.000 | 0.000 | 0.000 | 70.000 | 75.000 | |||
Temp 29 | 35.000 | degrees C | ok | 0.000 | 0.000 | 0.000 | 0.000 | 60.000 | 65.000 | |||
Temp 30 | 77.000 | degrees C | ok | 0.000 | 0.000 | 0.000 | 0.000 | 110.000 | 115.000 | |||
Memory | 0x0 | discrete | 0x4080| na | na | na | na | na | na | |||
Power Meter | 188 | Watts | ok | na | na | na | na | na | na | |||
}} | |||
The data can be parsed then pushed into a logging server. | |||
== Troubleshooting == | |||
{{highlight|lang=terminal|code= | {{highlight|lang=terminal|code= | ||
$ autoconf | $ autoconf | ||
Revision as of 02:01, 8 January 2019
ipmitool is a utility to fetch information from devices that support the Intelligent Platform Management Interface. This includes servers such as the HP Proliant DL380 G6 which I have at home.
The project can be found at:
Installation
Clone the repository from https://github.com/ipmitool/ipmitool, then run autoconf, ./configure, make.
A docker image containing this binary can be found at:
Usage
Poll the data from iLO by running ipmitool. An example output is given below.
/tmp # ./ipmitool -I lanplus -H X.X.X.X -U Administrator -P XXXXXXXXXX sensor
Unable to Get Channel Cipher Suites
UID Light
The data can be parsed then pushed into a logging server.
Troubleshooting
$ autoconf
configure.ac:8: error: possibly undefined macro: AM_INIT_AUTOMAKE
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
configure.ac:9: error: possibly undefined macro: AM_CONFIG_HEADER
configure.ac:38: error: possibly undefined macro: AM_PROG_LIBTOOL
Fix this by running:
$ autoreconf -i