SyntaxHighlight

The plugin being used is from http://www.mediawiki.org/wiki/Extension:SyntaxHighlight_GeSHi Terminal code uses a custom pygment.

Usage

To use SyntaxHighlight on this wiki, use the Highlight template.

{{highlight|lang=terminal|code=
code goes here
}}

Issues

Shell prompt shows partially as command if it contains a space

[root@kube ~]# kubectl get services --namespace=kube-system kubernetes-dashboard
NAME                   TYPE        CLUSTER-IP       EXTERNAL-IP   PORT(S)         AGE
kubernetes-dashboard   ClusterIP   10.108.158.128   <none>        443/TCP         2m36s

Shell prompt's leading space should not be part of the command.

# something something
something

Support heredoc

# cat <<EOF > /somewhere/something.txt
[something something]
this should all be grey text.
everything until the line with
a single EOF.
This should be grey too.
EOF
# this should be a command
## and comments should work
# cat /somewhere/something.txt
[something something]
...

Fixed Issues

These are issues that have been fixed. Leaving these up as a crude unit test.

The ESXi default shell and zsh % shell are not highlighting properly

[root@server:/vmfs/volumes/ee8ff6f0-af4dbc98] sh ./ghettoVCB.sh -f backup_vms

leo@nas:/data/vm% ls
backup_vms  esxi-backup/  ghettoVCB.conf  ghettoVCB.sh*

Empty # will cause the next # to be a comment, even if they are on different lines:

# gpart create -s GPT /dev/ada1
# gpart add -b 2048 -s 1953113520 -t freebsd-zfs -l disk01 /dev/ada1
#
# gpart create -s GPT /dev/ada2
# gpart add -b 2048 -s 1953113520 -t freebsd-zfs -l disk02 /dev/ada2
#
# gpart create -s GPT /dev/ada3
# gpart add -b 2048 -s 1953113520 -t freebsd-zfs -l disk03 /dev/ada3