SyntaxHighlight: Difference between revisions
From Leo's Notes
This page was last edited on 23 August 2017, at 18:29.
No edit summary |
|||
| Line 21: | Line 21: | ||
leo@nas:/data/vm% ls | leo@nas:/data/vm% ls | ||
backup_vms esxi-backup/ ghettoVCB.conf ghettoVCB.sh* | backup_vms esxi-backup/ ghettoVCB.conf ghettoVCB.sh* | ||
}} | |||
Empty # will cause the next # to be a comment, even if they are on different lines: | |||
{{highlight|lang=terminal|code= | |||
# gpart create -s GPT /dev/ada1 | |||
# gpart add -b 2048 -s 1953113520 -t freebsd-zfs -l disk01 /dev/ada1 | |||
# | |||
# gpart create -s GPT /dev/ada2 | |||
# gpart add -b 2048 -s 1953113520 -t freebsd-zfs -l disk02 /dev/ada2 | |||
# | |||
# gpart create -s GPT /dev/ada3 | |||
# gpart add -b 2048 -s 1953113520 -t freebsd-zfs -l disk03 /dev/ada3 | |||
}} | }} | ||
Revision as of 18:29, 23 August 2017
The plugin being used is from http://www.mediawiki.org/wiki/Extension:SyntaxHighlight_GeSHi
Usage
To use SyntaxHighlight on this wiki, use the Highlight template.
{{highlight|lang=terminal|code=
code goes here
}}
Issues
The ESXi default shell and zsh % shell are not highlighting properly
[root@server:/vmfs/volumes/ee8ff6f0-af4dbc98] sh ./ghettoVCB.sh -f backup_vms
leo@nas:/data/vm% ls
backup_vms esxi-backup/ ghettoVCB.conf ghettoVCB.sh*
Empty # will cause the next # to be a comment, even if they are on different lines:
# gpart create -s GPT /dev/ada1
# gpart add -b 2048 -s 1953113520 -t freebsd-zfs -l disk01 /dev/ada1
#
# gpart create -s GPT /dev/ada2
# gpart add -b 2048 -s 1953113520 -t freebsd-zfs -l disk02 /dev/ada2
#
# gpart create -s GPT /dev/ada3
# gpart add -b 2048 -s 1953113520 -t freebsd-zfs -l disk03 /dev/ada3