SyntaxHighlight: Difference between revisions

From Leo's Notes
This page was last edited on 19 May 2020, at 17:47.
← Older editNewer edit →
VisualWikitext
No edit summary
→Fixed Issues: Moved terminal highlight issues to MediaWiki Custom Pygments
Line 38: Line 38:
[something something]
[something something]
...
...
}}
== Fixed Issues ==
These are issues that have been fixed. Leaving these up as a crude unit test.
=== Shell prompt's leading space should not be part of the command. ===
{{highlight|lang=terminal|code=
# something something
something
}}
=== The ESXi default shell and zsh {{code|%}} shell are not highlighting properly  ===
{{highlight|lang=terminal|code=
[root@server:/vmfs/volumes/ee8ff6f0-af4dbc98] sh ./ghettoVCB.sh -f backup_vms
leo@nas:/data/vm% ls
backup_vms  esxi-backup/  ghettoVCB.conf  ghettoVCB.sh*
}}
=== Empty # will cause the next # to be a comment, even if they are on different lines: ===
{{highlight|lang=terminal|code=
# gpart create -s GPT /dev/ada1
# gpart add -b 2048 -s 1953113520 -t freebsd-zfs -l disk01 /dev/ada1
#
# gpart create -s GPT /dev/ada2
# gpart add -b 2048 -s 1953113520 -t freebsd-zfs -l disk02 /dev/ada2
#
# gpart create -s GPT /dev/ada3
# gpart add -b 2048 -s 1953113520 -t freebsd-zfs -l disk03 /dev/ada3
}}
}}

Revision as of 17:47, 19 May 2020

The plugin being used is from http://www.mediawiki.org/wiki/Extension:SyntaxHighlight_GeSHi Terminal code uses a custom pygment.

Usage

To use SyntaxHighlight on this wiki, use the Highlight template. 

{{highlight|lang=terminal|code=
code goes here
}}

Issues

Any highlight issues should go here.

Shell prompt shows partially as command if it contains a space

[root@kube ~]# kubectl get services --namespace=kube-system kubernetes-dashboard
NAME                   TYPE        CLUSTER-IP       EXTERNAL-IP   PORT(S)         AGE
kubernetes-dashboard   ClusterIP   10.108.158.128   <none>        443/TCP         2m36s

Support heredoc

# cat <<EOF > /somewhere/something.txt
[something something]
this should all be grey text.
everything until the line with
a single EOF.
This should be grey too.
EOF
# this should be a command
## and comments should work
# cat /somewhere/something.txt
[something something]
...