Traffic Forwarder using IPTables: Difference between revisions
From Leo's Notes
This page was last edited on 15 April 2013, at 05:05.
No edit summary |
No edit summary |
||
| Line 17: | Line 17: | ||
Add additional tweaks as required to the firewall. You will probably want to run <code>iptables-save</code> to make the changes persistent. | Add additional tweaks as required to the firewall. You will probably want to run <code>iptables-save</code> to make the changes persistent. | ||
[[Category:Linux]] | |||
Revision as of 05:05, 15 April 2013
To make a linux box act as the gateway for a NAT (in this example, 10.10.2.0/24) using IPTables, run:
# Enables forwarding echo 1 > /proc/sys/net/ipv4/ip_forward # Define $INSIDE as the interface going into the NAT # Define $OUTSIDE as the interface going to the internet # Route traffic destined to 10.10.2.0/24 to $INSIDE route add -net 10.10.2.0/24 dev $INSIDE # Masquerade traffic going to $OUTSIDE iptables -t nat -A POSTROUTING -o $OUTSIDE -j MASQUERADE # Forward traffic coming from $INSIDE iptables -A FORWARD -i $INSIDE -j ACCEPT
Add additional tweaks as required to the firewall. You will probably want to run iptables-save to make the changes persistent.