Mirror Ports on a HP ProCurve - Leo's Notes

From Leo's Notes

Revision as of 17:54, 6 March 2015 by Leo (talk | contribs) (Created page with "To mirror port A to port B: # config (config)# mirror-port B (config)# interface A (eth-A)# monitor You can verify if the ports are mirrored by checking: (config)# show...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This page was last edited on 6 March 2015, at 17:54.

To mirror port A to port B:

# config
(config)# mirror-port B
(config)# interface A
(eth-A)# monitor

You can verify if the ports are mirrored by checking:

(config)# show monitor
HP-2920-24G(eth-3)# show monitor

 Network Monitoring Port

  Mirror Port: B

  Monitoring sources
  ------------------
  A

To turn off the mirror:

(config)# no mirror-port 3

Networking