Clover
Clover is a bootloader that supports booting UEFI.
Project website: https://github.com/CloverHackyColor/CloverBootloader
Booting Linux with Clover
You may wish to use Clover to boot Linux if you installed Linux on a NVME device that your BIOS isn't capable of detecting.
For my use case, I had installed Proxmox on a NVME device on an old Sandy Bridge computer. In order to boot Proxmox, I installed Clover on a USB drive which the BIOS can boot from which then boots Proxmox on the NVME drive. To do this:
- Install Clover on a USB drive using Rufus.
- Go into the EFI/CLOVER directory and edit the
config.plistfile with the following:Adjust the volume ID with the ID of the partition containing grub. Ensure that the path exists on the partition.<?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Boot</key> <dict> <key>Timeout</key> <integer>5</integer> <key>DefaultVolume</key> <string>LastBootedVolume</string> </dict> <key>GUI</key> <dict> <key>Custom</key> <dict> <key>Entries</key> <array> <dict> <key>Path</key> <string>\EFI\BOOT\BOOTX64.EFI</string> <key>Title</key> <string>Proxmox</string> <key>Type</key> <string>Linux</string> <key>Volume</key> <string>964F18C8-9ADB-4DEB-AA70-75361FF39E4A</string> <key>VolumeType</key> <string>Internal</string> </dict> <dict> <key>Path</key> <string>\EFI\BOOT\BOOTX64.EFI</string> <key>Title</key> <string>Proxmox</string> <key>Type</key> <string>Linux</string> <key>Volume</key> <string>85C5849B-9824-4D3A-961C-2DD190CD8ADE</string> <key>VolumeType</key> <string>Internal</string> </dict> </array> </dict> </dict> </dict> </plist> - For NVME devices, you'll have to also move/copy the
NvmExpressDxe.efidriver from theEFI/CLOVER/drivers/offtoEFI/CLOVER/drivers/UEFIdirectory - Reboot. Hit F3 when you see the Clover boot menu and select the entry for Proxmox. Clover should be able to remember this and autoboot into Proxmox next time.
Troubleshooting
Clover doesn't autoboot
I wasted more time than I'd like to admit trying to figure out why I couldn't get Clover to autoboot. It turns out, I had the path to the EFI executable wrong. Doublecheck the path and volume IDs.