Airthings Wave Plus
Airthings Wave Plus is a air quality monitor with Bluetooth Low Energy capability. It's capable of measuring temperature, humidity and also CO2, Radon, and VOC. The unit runs on 2 AA batteries. You can poll its status via Bluetooth LE periodically using any device that supports Bluetooth including a Raspberry Pi or an ESP32.
MQTT
Using OpenMQTTGateway on a ESP32, we can read the unit's readings via Bluetooth LE and push it to a MQTT server.
Create a MQTTtoBT command. You should publish this message to something like: openmqtt/ESP32/commands/MQTTtoBT/config.
{
"ble_read_address":"D8:71:4D:A9:CB:C3",
"ble_read_service":"b42e1c08-ade7-11e4-89d3-123b93f75cba",
"ble_read_char":"b42e2a68-ade7-11e4-89d3-123b93f75cba",
"value_type":"HEX",
"ttl":10,
"immediate":true
}
You should then hopefully be able to hear back once a connection gets established.
{
"id":"D8:71:4D:A9:CB:C3",
"service":"b42e1c08-ade7-11e4-89d3-123b93f75cba",
"characteristic":"b42e2a68-ade7-11e4-89d3-123b93f75cba",
"read":"015f220073008400ba07ddab5a0247000000ac05",
"success":true
}
The data here needs to be decoded. The data structure looks like this:
typedef struct
{
uint8_t version = 0;
uint8_t humidity = 0;
uint8_t ambientLight = 0;
uint8_t unused01 = 0;
uint16_t radon = 0;
uint16_t radonLongterm = 0;
uint16_t temperature = 0;
uint16_t pressure = 0;
uint16_t co2 = 0;
uint16_t voc = 0;
} WavePlusRawReadings;
In the example above, we'll break the read data out into their individual fields and decode it into useful measurements.
| Hex | Name | Final reading |
|---|---|---|
01
|
Version | Version 1 |
5f
|
Humidity | 0x5f = 95 / 2 = 47.5% |
22
|
Ambient Light | 0x22 = 34 |
00
|
Unused | |
7300
|
Radon, 24 hours | 0x0073 = 115 Bq |
8400
|
Radon, long term | 0x0084 = 132 Bq |
ba07
|
Temperature | 0x07ba = 1978 / 100 = 19.78 C |
ddab
|
Air Pressure | 0xabdd = 43997 / 50 = 879.94 Pa |
5a02
|
CO2 | 0x025a = 602 ppm |
4700
|
VOC | 0x0047 = 71 ppb |
0000
|
?? | |
ac05
|
?? | 0x05ac = 1452 |