Furbo2

From Leo's Notes
Revision as of 03:23, 25 October 2023 by Leo (talk | contribs) (Initial content)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
This page was last edited on 25 October 2023, at 03:23.

Some notes on the Fubo2 treat thrower.

The Furbo2 is based on the Ambarella S2LM IronMan Board. It has a 128MB nand chip.

Hacking the Furbo2

Exploit the RTSP server

See Somerset Recon's blog post on this: https://www.somersetrecon.com/blog/2021/hacking-the-furbo-part-1

The GitHub repo with the presentation and exploit code is available at: https://github.com/Somerset-Recon/furbo-research

Enabling root access

In order to log in as root on the serial console, you'll have to first set the root password. Initially, the root password is set to something unknown. To work around this, you'll have to use the RTSP server exploit to get a root shell and then run echo -e "root\nroot" | passwd root.

You may try to boot into the system using init=/bin/sh by connecting the UART, then hold down [enter] while powering on the device to get into the Ambarella bootloader. Once in the bootloader, run:

amboot>  boot console=ttyS0 ubi.mtd=lnx root=ubi0:rootfs rw rootfstype=ubifs init=/bin/sh video=amb0fb:720x480,720x480,1,0

You'll be dropped into a shell as root and you may try to run passwd as root to set the new root password. You can also set the passwords for the other accounts as well. This method doesn't seem to update the password expiry value and causes the login to fail with 'token manipulation error'.

Stop Furbo2 services

The Furbo2 systemd service seems to be responsible for starting the primary Furbo daemon that's responsible for phoning home to Furbo's servers and allowing your phone app to work. This service also sets up the WiFi interface.

Since my plan is to have the device 'offline' from the Internet, I disabled the furbo2 service and replaced the WiFi setup functionality with another systemd service. I noticed that something still triggers the furbo2 service even when it's disabled, so you'll have to stop this service when the device starts for the first 30 or so seconds.

Enable telnetd

The busybox version that's bundled has the telnetd applet. Enable the telnetd backdoor with this service file:

[Unit]
Description=Very important backdoor.

[Service]
Type=simple
Restart=always
RestartSec=5
ExecStart=/bin/busybox telnetd -F -l /bin/bash

[Install]
WantedBy=multi-user.target

Keep in mind that this is wildly insecure.

Enable dropbear / sshd

Use the statically compiled version of dropbear for ARMv7 from https://github.com/mzpqnxow/arm-dropbear-static. Copy the binary to /usr/bin/dropbear and then add the following systemd service file:

[Unit]
Description=Dropbear SSH Server
After=network.target

[Service]
Type=simple
ExecStartPre=/bin/mkdir /tmp/dropbear
ExecStart=/usr/bin/dropbear -F -P /run/dropbear.pid -R

[Install]
WantedBy=multi-user.target

That should open port 22 for SSH access. Access the system using your root account credentials.

RTSP access

The RTSP server is available on port 554. Use /stream0 for 1080p, /stream1 for 720p, /stream2 for 360p.

Disabling the overlay image

The Furbo logo is an overlay which is added from the image at /usr/share/oryx/video/overlay/FurboLogo{360,720,1080}p.bmp files.

To disable it, edit /etc/oryx/video/overlay.acs. which contains the definitions for each of the streams. Comment out the 'area1' sections by prepending a double dash.

Launching treats

There are a bunch of Furbo/Ambarella scripts under /usr/local/bin. Some noteworthy scripts are listed below:

Script Function Usage
fb_aplay.sh Plays an audio clip. Wrapper around aplay. fb_aplay.sh audio-input-fileaplay
fb_arecord.sh Records from onboard microphone fb_arecord.sh audio-output-file duration
fb_led.sh Sets the LED color fb_led.sh <color>
fb_icr.sh Controls the IR led fb_icr.sh day|night
fb_toss_loop.sh Triggers the toss functionality fb_toss_loop.sh 1