Tails

From Leo's Notes
Revision as of 04:05, 29 May 2017 by Leo (talk | contribs)
This page was last edited on 29 May 2017, at 04:05.

PXE Boot Tails

Tails does not PXE boot nicely since it seems to lack the network drivers after unpacking initrd2.img. Upon further investigation, the initrd2.img image has the network module (in my case, e1000) but isn't being loaded because it is blacklisted in the file /etc/modprobe.d/all-net-blacklist.conf. Removing this file from the initrd image fixes this issue.

To do this, copy the initrd2.img file to another system that has the dracut binaries. In this example, I will be using my Fedora 25 server.

## Copy the Tails initrd to /tmp
# cp /live/initrd2.img /tmp

## Make a directory to extract the files
# mkdir -p /tmp/new_initrd
# cd /tmp/new_initrd
# /usr/lib/dracut/skipcpio /tmp/initrd2.img

For the sake of completeness, here is the PXE boot menu entry for tails:


See Also

It seems like another person had the same issue: