RS232 Relay: Difference between revisions
From Leo's Notes
This page was last edited on 5 September 2017, at 19:09.
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
I believe the manual for it is this: https://s3.amazonaws.com/assets.controlanything.com/manuals/R2X.PDF | I believe the manual for it is this: https://s3.amazonaws.com/assets.controlanything.com/manuals/R2X.PDF | ||
On Linux, | On Linux, to turn the relay off and on via serial: | ||
{{highlight|lang=terminal|code= | {{highlight|lang=terminal|code= | ||
## Ensure serial is at 9600 baud | |||
# stty -F /dev/ttyS0 9600 | # stty -F /dev/ttyS0 9600 | ||
## Toggle it | |||
# while true ; do echo -e "\xFE\x01" > /dev/ttyS0 ; sleep 1 ; echo -e "\xFE\x00" > /dev/ttyS0 ; sleep 1 ; done | # while true ; do echo -e "\xFE\x01" > /dev/ttyS0 ; sleep 1 ; echo -e "\xFE\x00" > /dev/ttyS0 ; sleep 1 ; done | ||
Revision as of 19:09, 5 September 2017
There is this RS232 Relay with 'www.iorelay.com' printed on the PCB.
I believe the manual for it is this: https://s3.amazonaws.com/assets.controlanything.com/manuals/R2X.PDF
On Linux, to turn the relay off and on via serial:
## Ensure serial is at 9600 baud
# stty -F /dev/ttyS0 9600
## Toggle it
# while true ; do echo -e "\xFE\x01" > /dev/ttyS0 ; sleep 1 ; echo -e "\xFE\x00" > /dev/ttyS0 ; sleep 1 ; done
## You can also use printf
# printf \\$(printf '%03o' 254) > /dev/ttyS0
# printf \\$(printf '%03o' 0) > /dev/ttyS0