RS232 Relay: Difference between revisions
From Leo's Notes
This page was last edited on 1 September 2019, at 03:04.
No edit summary |
m recategorize |
||
| Line 16: | Line 16: | ||
# printf \\$(printf '%03o' 0) > /dev/ttyS0 | # printf \\$(printf '%03o' 0) > /dev/ttyS0 | ||
}} | }} | ||
[[Category:Tinkering]] | |||
Revision as of 03:04, 1 September 2019
There is this RS232 Relay with 'www.iorelay.com' printed on the PCB.
I believe the manual for it is this: https://s3.amazonaws.com/assets.controlanything.com/manuals/R2X.PDF
On Linux, to turn the relay off and on via serial:
## Ensure serial is at 9600 baud
# stty -F /dev/ttyS0 9600
## Toggle it
# while true ; do echo -e "\xFE\x01" > /dev/ttyS0 ; sleep 1 ; echo -e "\xFE\x00" > /dev/ttyS0 ; sleep 1 ; done
## You can also use printf
# printf \\$(printf '%03o' 254) > /dev/ttyS0
# printf \\$(printf '%03o' 0) > /dev/ttyS0