WireGuard

WireGuard is an easy to use VPN that provides a secure connection between two parties using public key authentication.

Installation

On CentOS 8:

# curl -Lo /etc/yum.repos.d/wireguard.repo https://copr.fedorainfracloud.org/coprs/jdoss/wireguard/repo/epel-7/jdoss-wireguard-epel-7.repo
# yum -y install epel-release
# yum -y update
# yum install wireguard-dkms wireguard-tools

Ensure that you have the latest kernel and kernel development packages so that DKMS is able to build the wireguard kernel module.

Create a wg0.conf file in /etc/wireguard, then generate a new WireGuard key with wg genkey.

# mkdir /etc/wireguard && cd /etc/wireguard
# (umask 077 && printf "[Interface]\nPrivateKey = " | sudo tee /etc/wireguard/wg0.conf > /dev/null)
# wg genkey | sudo tee -a /etc/wireguard/wg0.conf | wg pubkey | sudo tee /etc/wireguard/publickey

Connecting to a Remote Site

Run the installation steps above on both local and remote sites. Define that local IP address for each site under the Interface section:

Eg. Site-A:

[Interface]
PrivateKey = (private-key)
ListenPort = 5555
SaveConfig = true
Address = 192.168.1.1/24

Site-B:

[Interface]
PrivateKey = (private-key)
ListenPort = 5555
SaveConfig = true
Address = 192.168.1.2/24

To have Site-A peer with Site-B, define a [Peer] section on the Site-A configuration with the following fields:

PublicKey = (site-B-public-key)
AllowedIPs = 192.168.1.2/32
Endpoint = (site-B-endpoint-IP):5555

Similarly with Site-B:

PublicKey = (site-A-public-key)
AllowedIPs = 192.168.1.1/32
Endpoint = (site-A-endpoint-IP):5555

Start WireGuard on both sites:

# systemctl start wg-quick@wg0
# systemctl enable wg-quick@wg0
# ip a show wg0
6: wg0: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1420 qdisc noqueue state UNKNOWN group default qlen 1000
    link/none
    inet 192.168.1.2/24 scope global wg0
       valid_lft forever preferred_lft forever

Once WireGuard establishes a connection, you should be able to ping the remote site's internal IP address.

Usage

Once configured, start the WireGuard service. WireGuard connections can be monitored with wg or wg show.

# wg show
interface: wg0
  public key: (public-key)
  private key: (hidden)
  listening port: 5555

peer: (peer-public-key)
  endpoint: 10.1.1.1:5555
  allowed ips: 192.168.1.1/32
  latest handshake: 55 seconds ago
  transfer: 68.72 KiB received, 218.09 KiB sent
  persistent keepalive: every 30 seconds

To add an additional peer:

# wg set wg0 peer public_key_of_second_server endpoint public_IP_of_second_server:5555 allowed-ips 192.168.1.X/32

Config changes only happen when the service is restarted or stopped.

Troubleshooting

Missing Kernel Module

If the kernel module isn't loading, ensure that you have the proper kernel development package installed for the running kernel. Reinstall the wireguard-dkms package to trigger a kernel module rebuild. Alternatively, trigger DKMS to rebuild the module with:

# dkms build -m wireguard/0.0.20191012

Connection Timeout

If your WireGuard connections are dropping or becomes unresponsive, add a PersistentKeepalive under the Peer section. Eg:

[Peer]
PublicKey = private-key
AllowedIPs = 192.168.1.1/32
Endpoint = endpoint:5555
PersistentKeepalive = 30

See Also

• https://www.digitalocean.com/community/tutorials/how-to-create-a-point-to-point-vpn-with-wireguard-on-ubuntu-16-04
• https://blog.stigok.com/2018/10/08/wireguard-vpn-server-on-centos-7.html