Components - Revision history

Leo: /* Regulators, supervisors, chargers */

2022-10-29T05:55:00Z

Regulators, supervisors, chargers

← Older revision		Revision as of 05:55, 29 October 2022
Line 201:		Line 201:
	\|-		\|-
	\|MCP1700		\|MCP1700
	\|8		\|5
	\|3.3v CMOS LDO voltage regulator		\|3.3v CMOS LDO voltage regulator
	\|-		\|-

Leo at 06:46, 14 February 2022

2022-02-14T06:46:39Z

← Older revision		Revision as of 06:46, 14 February 2022
Line 440:		Line 440:
	\|-		\|-
	\|Rotary encoder		\|Rotary encoder
	\|4		\|3
	\|KY-040 Rotary Encoder Module with 15×16.5 mm with Knob Cap		\|KY-040 Rotary Encoder Module with 15×16.5 mm with Knob Cap
	\|-		\|-
Line 899:		Line 899:

	==Lights==		==Lights==
	In separate LED box		All LED stuff are in a separate LED box
	{\| class="wikitable"		{\| class="wikitable"
	! width="350px" \|Item		! width="350px" \|Item
Line 973:		Line 973:
	\|Arduino RTC module		\|Arduino RTC module
	\|1		\|1
	\|i2c~~, used by Raspberry Pi~~		\|i2c
	\|-		\|-
	\|Arduino SD card module		\|Arduino SD card module
Line 1,126:		Line 1,126:
	\|-		\|-
	\|4 channel shift level		\|4 channel shift level
	\|2		\|0
	\|shift level module / breakout		\|shift level module / breakout
	\|-		\|-
	\|TXS0108E Bi-directional converter module		\|TXS0108E Bi-directional converter module
	\|3		\|2
	\|8 channel logic level converter module		\|8 channel logic level converter module
	\|-		\|-

Leo: Added categories and navbox

2021-12-30T00:56:48Z

Added categories and navbox

← Older revision		Revision as of 00:56, 30 December 2021
Line 1,223:		Line 1,223:
	\|		\|
	\|}		\|}

			{{Navbox Tinkering}}
			[[Category:Tinkering]]

Leo: /* Variable Resistors */

2021-10-12T06:04:54Z

Variable Resistors

← Older revision		Revision as of 06:04, 12 October 2021
Line 550:		Line 550:
	\|-		\|-
	\|0.1		\|0.1
	\|10		\|19
	\|1 W		\|1 W
			\|-
			\|0.15, 0.22
			\|3
			\|1/2 W, scavenged from PSU
			\|-
			\|5.6
			\|2
			\|5W ceramic
	\|-		\|-
	\|10		\|10
	\|20		\|20
	\|1/4 W		\|1/4 W
			\|-
			\|15
			\|2
			\|1/4 W, in 10 ohm bag
	\|-		\|-
	\|22		\|22
Line 571:		Line 583:
	\|150		\|150
	\|1		\|1
	\|1/2 W		\|1/2 W, in 100 ohm bag
	\|-		\|-
	\|220		\|220
Line 679:		Line 691:
	\|4		\|4
	\|Thermistor, 100 ohm @ 25C		\|Thermistor, 100 ohm @ 25C
			\|-
			\|sck 2r512
			\|
			\|
	\|-		\|-
	\|Photoresistor		\|Photoresistor
	\|8		\|17
	\|		\|
	\|}		\|}

Leo: /* Regulators, supervisors, chargers */

2021-10-12T05:19:07Z

Regulators, supervisors, chargers

← Older revision		Revision as of 05:19, 12 October 2021
Line 205:		Line 205:
	\|-		\|-
	\|MT3608 Module		\|MT3608 Module
	\|4		\|0
	\|DC-DC Boost Module		\|DC-DC Boost Module
	\|-		\|-
Line 211:		Line 211:
	\|1		\|1
	\|DC-DC Boost module		\|DC-DC Boost module
			\|-
			\|0.8v 3.3 boost module
			\|4
			\|DC-DC 0.8v to 3.3v boost module
	\|-		\|-
	\|LM2596 Module		\|LM2596 Module

Leo at 23:27, 11 October 2021

2021-10-11T23:27:07Z

← Older revision		Revision as of 23:27, 11 October 2021
Line 95:		Line 95:
	\|-		\|-
	\|ATTiny85		\|ATTiny85
	\|5		\|4
	\|Atmel ATTiny85-20PU		\|Atmel ATTiny85-20PU
	\|}		\|}
Line 168:		Line 168:
	\|-		\|-
	\|32.768KHz Crystal		\|32.768KHz Crystal
	\|10 ~~''on order''~~		\|10
	\|		\|
	\|}		\|}
Line 241:		Line 241:
	\|-		\|-
	\|TP4056 charge board		\|TP4056 charge board
	\|5		\|4
	\|USB micro Lithium battery charge module (protected)		\|USB micro Lithium battery charge module (protected)
	\|}		\|}
Line 357:		Line 357:
	\|-		\|-
	\|USB (micro) female, breakout adapter		\|USB (micro) female, breakout adapter
	\|5		\|8
	\|Micro USB breakout adapter, for testing or placing USB input elsewhere		\|Micro USB breakout adapter, for testing or placing USB input elsewhere
	\|-		\|-
Line 385:		Line 385:
	\|-		\|-
	\|Terminal block		\|Terminal block
	\|20		\|18
	20		18

	20		18
	\|2 pin		\|2 pin
	3 pin		3 pin
Line 544:		Line 544:
	! width="150px" \|Quantity		! width="150px" \|Quantity
	!Description		!Description
			\|-
			\|0.1
			\|10
			\|1 W
	\|-		\|-
	\|10		\|10
Line 645:		Line 649:
	\|-		\|-
	\|1k DIP pot		\|1k DIP pot
	\|		\|?
	\|		\|missing
	\|-		\|-
	\|10k DIP pot		\|10k DIP pot
	\|		\|?
	\|		\|missing
	\|-		\|-
	\|20k DIP pot		\|20k DIP pot
	\|		\|?
	\|		\|missing
	\|-		\|-
	\|1m DIP pot		\|1m DIP pot
Line 673:		Line 677:
	\|-		\|-
	\|Photoresistor		\|Photoresistor
	\|10		\|8
	\|		\|
	\|}		\|}
Line 868:		Line 872:
	\|10		\|10
	\|1 W		\|1 W
			\|-
			\|Misc
			\|10+
			\|There are lots of scavenged inductors
	\|}		\|}

	==Lights==		==Lights==
			In separate LED box
	{\| class="wikitable"		{\| class="wikitable"
	! width="350px" \|Item		! width="350px" \|Item
Line 943:		Line 952:
	\|-		\|-
	\|Arduino RTC module		\|Arduino RTC module
	\|0		\|1
	\|i2c, used by Raspberry Pi		\|i2c, used by Raspberry Pi
	\|-		\|-
Line 982:		Line 991:
	\|-		\|-
	\|ESP8266 Wemos D1		\|ESP8266 Wemos D1
	\|4		\|3
	\|ESP8266 Wemos Board		\|ESP8266 Wemos Board
	\|-		\|-
Line 990:		Line 999:
	\|-		\|-
	\|0.66" OLED Display		\|0.66" OLED Display
	\|2		\|1
	\|64x48 SSD 1306		\|64x48 SSD 1306
	\|-		\|-
Line 1,031:		Line 1,040:
	\|Green, used by electronic load		\|Green, used by electronic load
	\|-		\|-
	\|SSD1306 128x32 OLED display		\|0.91" SSD1306 128x32 OLED display
	\|4		\|4
	\|White		\|White
Line 1,041:		Line 1,050:
	\|7 segment display		\|7 segment display
	\|10+		\|10+
	\|		\|in LED box.
	\|-		\|-
	\|10 segment bar		\|10 segment bar
	\|10		\|10
	\|		\|in LED box.
	\|}		\|}

Line 1,068:		Line 1,077:
	\|MAX485CSA Converter Module		\|MAX485CSA Converter Module
	\|-		\|-
	\|Double Stepper Motor Driver		\|IBT-2 H-Bridge Double Stepper Motor Driver
	\|4		\|4
	\|Double BTS7960B DC 43A Stepper Motor Driver		\|Double BTS7960B DC 43A Stepper Motor Driver

Leo at 05:17, 27 July 2021

2021-07-27T05:17:49Z

← Older revision		Revision as of 05:17, 27 July 2021
Line 93:		Line 93:
	\|5		\|5
	\|2,048-word by 8-bit EEPROM		\|2,048-word by 8-bit EEPROM
			\|-
			\|ATTiny85
			\|5
			\|Atmel ATTiny85-20PU
	\|}		\|}

Line 145:		Line 149:
	\|}		\|}

	===~~Miscellaneous~~===		===Crystals===
	{\| class="wikitable"		{\| class="wikitable"
	!Item		!Item
Line 161:		Line 165:
	\|1.8432MHz Crystal		\|1.8432MHz Crystal
	\|1		\|1
			\|
			\|-
			\|32.768KHz Crystal
			\|10 ''on order''
	\|		\|
	\|}		\|}
Line 935:		Line 943:
	\|-		\|-
	\|Arduino RTC module		\|Arduino RTC module
	\|1		\|0
	\|i2c		\|i2c, used by Raspberry Pi
	\|-		\|-
	\|Arduino SD card module		\|Arduino SD card module
Line 1,024:		Line 1,032:
	\|-		\|-
	\|SSD1306 128x32 OLED display		\|SSD1306 128x32 OLED display
	\|4 ~~''on order''~~		\|4
	\|White		\|White
	\|-		\|-
Line 1,037:		Line 1,045:
	\|10 segment bar		\|10 segment bar
	\|10		\|10
	\|
	\|-
	\|
	\|
	\|		\|
	\|}		\|}
Line 1,181:		Line 1,185:
	\|4		\|4
	\|12V Peltier plate, thermoelectric cooler		\|12V Peltier plate, thermoelectric cooler
			\|-
			\|OH49E Hall Effect Sensor
			\|10
			\|
	\|-		\|-
	\|various motors		\|various motors

Leo: /* Miscellaneous */

2021-07-26T20:15:29Z

Miscellaneous

← Older revision		Revision as of 20:15, 26 July 2021
Line 152:		Line 152:
	\|-		\|-
	\|16MHz Crystal		\|16MHz Crystal
	\|1		\|12
	\|		\|
	\|-		\|-

Leo at 20:40, 29 June 2021

2021-06-29T20:40:26Z

← Older revision		Revision as of 20:40, 29 June 2021
Line 217:		Line 217:
	\|-		\|-
	\|LM2596 Mini Module		\|LM2596 Mini Module
	\|2 ~~''on order''~~		\|2
	\|Mini DC-DC 3A buck module		\|Mini DC-DC 3A buck module
	\|-		\|-
	\|LM2596 Module		\|LM2596 Module
	\|4 ~~''on order''~~		\|4
	\|DC-DC 3A buck module		\|DC-DC 3A buck module
	\|-		\|-
Line 1,006:		Line 1,006:
	\|-		\|-
	\|Relay		\|Relay
	\|2 ~~''on order''~~		\|2
	\|		\|
	\|}<br />		\|}<br />
Line 1,097:		Line 1,097:
	\|-		\|-
	\|TXS0108E Bi-directional converter module		\|TXS0108E Bi-directional converter module
	\|3 ~~''on order''~~		\|3
	\|8 channel logic level converter module		\|8 channel logic level converter module
	\|-		\|-
	\|SSR G3MB-202P 1 channel		\|SSR G3MB-202P 1 channel
	\|1 ~~''on order''~~		\|1
	\|		\|Solid-state relay module
	\|}		\|}

Line 1,164:		Line 1,164:
	\|-		\|-
	\|ML8511 UVB detector		\|ML8511 UVB detector
	\|2 ~~''on order''~~		\|2
	\|analog output		\|analog output
	\|-		\|-

Leo at 07:00, 26 June 2021

2021-06-26T07:00:48Z

← Older revision		Revision as of 07:00, 26 June 2021
Line 578:		Line 578:
	\|-		\|-
	\|1.5k		\|1.5k
	\|2		\|1
	\|1/8 W		\|1/8 W
	\|-		\|-
Line 732:		Line 732:
	\|-		\|-
	\|100 uF		\|100 uF
	\|12		\|9
	\|16V		1
			\|16V QIFA
			25v Ltec, used
	\|-		\|-
	\|220 uF		\|220 uF
Line 741:		Line 743:
	\|330 uF		\|330 uF
	\|10		\|10
	\|16V		1

			2

			1
			\|16V Chongx
			25V Ltec

			25V nichicon

			400V KMQ, used
	\|-		\|-
	\|470 uF		\|470 uF
	\|10		\|9
	\|16V		1

			1

			2
			\|16V Chongx
			10V Ltec

			275V X2 Carli, used

			275V X2 HJC, used
			\|-
			\|680uF
			\|2
			\|200V CapXon, used
	\|-		\|-
	\|820 uF		\|820 uF
Line 761:		Line 787:
	\|1500 uF		\|1500 uF
	\|3		\|3
	\|		2
			\|6.3v nichicon
			16v KZH, used
	\|-		\|-
	\|1800 uF		\|1800 uF
	\|10		\|10
	\|JY brand		\|6.3v JY brand
			\|-
			\|2200 uF
			\|1
			2
			\|6.3v taicon, used
			16v KZE, used
			\|-
			\|4700 uF
			\|1
			\|25v Rubycon
	\|}		\|}
	<br />		<br />
Line 854:		Line 892:
	==Arduino, sensors, modules.==		==Arduino, sensors, modules.==

	=== Arduino ===		===Arduino===
	{\| class="wikitable"		{\| class="wikitable"
	! width="350px" \|Item		! width="350px" \|Item
Line 917:		Line 955:
	\|}		\|}

	=== ESP8266, Wemos D1, ESP32 ===		===ESP8266, Wemos D1, ESP32===
	{\| class="wikitable"		{\| class="wikitable"
	! width="350px" \|Item		! width="350px" \|Item
Line 1,008:		Line 1,046:
	===Miscellaneous Modules===		===Miscellaneous Modules===

	==== Module-like widgets ====		====Module-like widgets====
	{\| class="wikitable"		{\| class="wikitable"
	! width="350px" \|Item		! width="350px" \|Item
Line 1,067:		Line 1,105:
	\|}		\|}

	==== Sensors ====		====Sensors====
	{\| class="wikitable"		{\| class="wikitable"
	! width="350px" \|Item		! width="350px" \|Item